Health O Meter 2650KL operation manual User Settings, Operation Instructions

OPERATION INSTRUCTIONS

03UI Test

The scale has a diagnostic routine where it tests the User Interface (UI) hardware functionality (LCD, keypad). In order to do this the user has to press all the keys according to the messages displayed on the screen.

If the requested command was not received or wrong button was pressed, the following message will be displayed.

If after 10 seconds the requested command was not received, the following message will be displayed. If “UI Error Failure” is displayed, refer to qualified service personnel.

07USER SETTINGS

01Retain Entered Values

This option allows the user to use the same values for ID, height and TARE between weighing. If this option is disabled, the user has to re-enter these values for each reading. If the values are not entered, only the weight is stored.

NOTE: These values cannot be retained by ID number.

16