4.Lubricate a M8 x 157mm Axle (59). Attach the Handlebar Swing Arm (29) to the Main Frame (47) with the M8 x 157mm Axle, two M9 Rubber Shield Washers (58), two 5/16” Washers (55), and two M8 Acorn Nuts (56).
5.Attach the Short and Long Link Arms (11, 12) to the Handlebar Swing Arm (29) with the 3/8” x 1 3/8” Shoulder Bolt (61), and the M8 Nylon Lock Nut
(31). Note: Part of the Main Frame is not shown in this drawing for easier part indentification.
6.Attach the Handlebar (9) to the Handlebar Swing Arm (29) with two M6 x 35mm Bolts (3), two 1/4” Flat Washers (57), and two M6 Square Nuts (4).
7.Slide the Weight Saddle (34) onto the Seat Frame (48). The indicated tab on the Weight Saddle must be inserted into the tube on the Seat Frame.
6
4 |
|
|
| 29 | |
56 | 58 |
|
|
| |
55 | 47 |
|
58 |
| |
55 | ||
|
| |
|
| 56 |
5 |
|
|
| 29 |
|
| 61 | 31 |
|
| |
|
| 12 |
11 |
|
|
6 |
|
|
| 9 | 3 |
|
| |
| 29 | 57 |
|
| |
| 4 |
|
7 | Tab | 34 |
| ||
Tube |
|
|
| 48 |
|
