8.Insert the Seat (17) into the Weight Saddle (34). Slide the Large Washer (19) onto the Seat Bolt
(51). Tighten the Seat Knob (18) onto the Seat Bolt until the Washer is secure against the Seat Frame (48).
9.Insert the Weight Bar (32) through the Weight Saddle (34). Center the Weight Bar in the Weight Saddle. Thread the Weight Bar Screw (54) fully into the drilled hole in the Weight Saddle to secure the Weight Bar.
Slide a Weight Clip (1) onto each side of the Weight Bar.
10.Press the Magnet w/Bracket (13) onto the Pedal Frame (30) as shown.
Slide the Monitor (6) fully onto the Main Frame (47) as shown in inset drawing A. Press down on the Monitor as shown in inset drawing B until it snaps into place.
11.Remove the battery cover from the Monitor (6). Insert a new AAA battery into the Monitor. Identify the negative
7
8 |
|
|
|
| 17 |
|
| 51 |
| 34 | 19 |
|
| |
48 |
|
|
|
| 18 |
9 |
|
|
1 |
|
|
|
| 34 |
|
| 54 |
|
| 32 |
|
| 1 |
10 |
| A |
6 |
|
|
47 |
| B |
|
| |
13 |
|
|
30 |
|
|
11 |
|
|
|
| Battery |
|
| Cover |
(+) |
| |
|
| AAA |
|
| Battery |
6 |
|
|
