5.Have another person hold the Seat Frames (7) under the Rear Frame (2) as shown. Attach the Seat Frames and the Seat (12) to the Rear Frame with four M6 x 42mm Button Screws (49) and four M6 Washers (55). See step 3. Tighten the two M8 x 70mm Button Bolts (54).
See step 4. Tighten the four M6 x 38mm Button Screws (48).
6.The Console (16) requires four D batteries (not includ- ed); alkaline batteries are recommended. Press the tab on the battery door and remove it. Insert four bat- teries into the Console as shown. Make sure that the batteries are oriented as shown by the diagram on the battery door. Then, reattach the battery door.
7.Connect the console wire harness to the Upper Wire Harness (36). Insert the console wire harness into the Upright (13). Attach the Console (16) to the Upright with four M4 x 16mm Round Head Screws (52).
5 | 12 |
|
|
|
|
|
|
| |
| 2 |
|
|
|
| 55 | 55 | 7 | |
|
| |||
| 49 | 55 | 49 |
|
|
|
|
| |
6 |
|
|
| 16 |
|
|
|
| |
| Batteries |
|
|
|
| Tab |
|
|
|
| Battery Door |
|
| |
7 |
| Console |
|
|
|
|
|
| |
|
| Wire |
|
|
|
| Harness |
|
|
52 |
| 36 |
| 16 |
|
|
| ||
| 13 |
|
| |
|
|
|
| |
6
