![](/images/new-backgrounds/1292868/29286811x1.webp)
2.Press four 2Ó Square Inner Caps (68) into the Frame (2).
Identify the Left Wheel Channel (3) and the Right Wheel Channel (4) by comparing the welded brackets on the bottom of each Wheel Channel.
Slide the Left Wheel Channel (3) onto the indicated Small Wheels (40) attached to the Frame (2).
Note: This will be easier to do if you lie the Frame on the floor.
Slide the Right Wheel Channel (4) onto the Frame
(2)in the same manner.
3.Slide the Left and Right Wheel Channels (3, 4) onto the 3/8Ó x 2 1/2Ó Carriage Bolts (60) in the Base (1). Partially tighten a 3/8Ó Nylon Locknut (39) onto each Carriage Bolt but do not fully tighten the Nylon Locknuts yet.
6
2 |
|
68 |
|
2 | 68 |
| |
4 |
|
40 |
|
| 3 |
68 |
|
| 40 |
| 68 |
3 |
|
4 |
|
| 3 |
39 |
|
| 39 |
60 |
|
| 60 |
1 |
|