4300 Wood Stove Series (ACC)

R

B. Outside Air Kit Installation

A source of air (oxygen) is necessary in order for combus- tion to take place. Whatever combustion air is consumed by the fire must be replaced. Air is replaced via air leak- age around windows and under doors. In homes that have tightly sealed doors and windows, an outside air source is needed. An optional Outside Air Kit is available.

Included in OAK-ACC: Termination cap, (2) wire ties, flex adapter, and fasteners

Included in SRV7033-041:Cover plate and sealing rope (see Floor Installation Alternative below, Figure 14.2)

Items Needed for Installation (not supplied)

•4 inch flex aluminum pipe, or if using alternate material, then it shall be made from durable, non-combustible, heat resistant material up to 350oF. Cut the pipe to the required length for your installation.

•Phillips head screw driver

•Silicone sealant

•Drills and saws necessary for cutting holes through the wall or flooring in your home.

1.Remove all materials from packing box.

2.Using a #2 Phillips screw driver attach the flex adapter to the stove using 4 screws. Figure 14.1.

3.Remove circular” knock-out” in the base of the pedestal.

4.Floor & Rear Installation: Cut a 4 inch (102mm) hole in outside wall or floor to accommodate outside air piping. Use 4 inch (102mm) aluminum metal flex or rigid piping to directly connect outside air to appliance intake. Use the supplied termination cap with a rodent screen. Seal between the wall (or floor) and the pipe with silicone to prevent moisture penetration.

WARNING

Fire Risk.

Asphyxiation Risk.

Do not draw outside combustion air from:

•Wall, floor or ceiling cavity

•Enclosed space such as an attic or garage

•Close proximity to exhaust vents or chimneys

Fumes or odor may result

WARNING

Asphyxiation Risk.

Outside air inlet must be located to prevent block- age from:

•Leaves

•Snow or ice

•Other debris

Block may cause combustion air starvation

Smoke spillage may set off alarms or irritate sensi- tive individuals.

WARNING

Asphyxiation Risk.

Length of outside air supply duct shall NOT exceed the length of the vertical height of the exhaust flue.

•Fire will not burn properly

•Smoke spillage occurs when door is opened due to air starvation.

5.Floor Installation Alternative: In some instances you may not be able to install the flex pipe as show in Figure

14.1.If that is the case, you will need to order SRV7033- 041 which includes a cover plate and sealing rope as shown in Figure 14.2. The goal is to seal the pedestal so no room air can leak into the pedestal.

 

Flex Adapter

 

 

Wire Tie

 

 

Terminatio

Rope to Seal

 

Cap

 

Pedestal

Remove circular

 

Cover

 

Plate

“knock-out” in base

 

 

of pedestal.

 

 

Flex Line Wire Tie

 

 

Figure 14.1 - Floor & Rear Installation

 

Figure 14.2 - Floor Installation Alternative

Page 14

7037-135E

September 1, 2008

Page 13 Page 15
Page 14
Image 14
Hearth and Home Technologies 43M-ACC-MBK Wood Stove Series ACC Outside Air Kit Installation, Fire Risk Asphyxiation Risk
Page 13 Page 15

43M-ACC-MBK, 43ST-ACC specifications

Hearth and Home Technologies has long been a leader in the design and manufacturing of high-quality heating appliances, and their models 43ST-ACC and 43M-ACC-MBK are no exception. These gas fireplaces combine aesthetic appeal with innovative technologies aimed at providing efficient heating solutions for residential spaces.

The 43ST-ACC is designed with versatility in mind. It features a traditional style that can seamlessly integrate into a variety of home decors. One of its standout characteristics is the expansive viewing area that allows homeowners to enjoy the mesmerizing flames. The fireplace utilizes advanced ceramic glass technology that enhances the thermal efficiency, ensuring a warm environment without compromising on safety.

On the technical side, the 43ST-ACC is equipped with the IntelliFire ignition system which provides convenient, reliable startup. This system also allows for enhanced safety features, ensuring the unit operates smoothly and safely. The adjustable flame height and heat output settings further allow users to create their desired ambiance while optimizing fuel consumption.

Additionally, the 43M-ACC-MBK model is geared towards those who appreciate a modern, sophisticated design. This model is characterized by its sleek, black finish and clean lines, making it an eye-catching centerpiece in any room. Like the 43ST-ACC, it also boasts an impressive viewing area, but it comes with the added benefit of customizable features, including remote control operation and programmable thermostats.

Both models are designed with efficiency in mind, incorporating technology that maximizes heat distribution throughout the room. Their direct vent operation ensures that combustion gases are exhausted outside, making them a safe choice for indoor spaces. The inclusion of a blower system in both models enhances air circulation, providing an even distribution of warmth throughout the environment.

In conclusion, the Hearth and Home Technologies 43ST-ACC and 43M-ACC-MBK gas fireplaces combine style, functionality, and advanced technology. Whether you are looking for a traditional touch or a modern flair, these models cater to diverse preferences while ensuring efficient heating and safety. With their innovative features and beautiful designs, they truly represent the pinnacle of home heating solutions. Whether settling in for a cozy evening or entertaining guests, these fireplaces are sure to enhance any living space.
Top Page Image Contents