Page 4 7037-135E September 1, 2008
R
4300 Wood Stove Series (ACC)
Replace the rebrick if they become crumbly and/or if there
is a 1/4 inch (6.5mm) gap between the bricks.
Inspect the rebrick after each ash removal.
The rebox is lined with high quality rebrick, which has
exceptional insulating properties. There is no need to use a
grate; simply build a re on the rebox oor. Do not operate
appliance without rebrick.
1. After the coals have completely cooled, remove all old
brick and ash from unit and vacuum rebox.
2. Remove new brick set from box and lay out to diagram
shown.
. Lay bottom bricks in unit.
4. Install rear bricks on the top of the bottom bricks. Slide
top of bricks under clip on back of rebox wall and push
bottom of brick back.
5. Install side bricks. Slide top of brick under clips on side
of rebox and push the bottom of the brick until it is ush
with the side of the appliance.
C. Firebrick Replacement
Use Part 82-0550 when ordering individual brick. Provide brick
dimension or copy this page, mark the desired brick and take it
to your authorized dealer.
Figure 34.2 - 4300 Step Top Brick Assembly
NOTE: The Ash Removal System is only
available for the Step Top Model and not
for the Millennium Model.
5
11
1
1
11
1
1
1
1
1
1
222
5
2
3
4
9 in.
2-1/2 in.
2 in.
6-/8 in.
3
7-1/4 in.
 in.
9 in.
4
Figure 34.1 - 4300 Millennium Top Brick Assembly
No. Brick Size Qty
19 x 4-1/2 x 1-1/4 12
2 6 x 4-1/2 4
39 x 4-1/2 with angles 1
49 x  with angle 1
59 x 2 x 1-1/4 2
No. Brick Size Qty
19 x 4-1/2 x 1-1/4 10
2 6 x 4-1/2 4
34-1/2 x 4-1/2 x 1-1/4 2
49 x 4-1/2 with angles 1
59 x  with angle 1
69 x 2 x 1-1/4 2
3
11
1
1
1
1
1
1
5
2222
6
4
6
3
11
No Brick,ARS
Grate Location
9 in.
2-1/2 in.
2 in.
6-/8 in.
4
7-1/4 in.
 in.
9 in.
5