F. Finishing Material

Refer to Sections 9.A. and Sections 9.B. for combustible/ non-combustible materials. Refer to Figure 9.2 for non-com- bustible zone if cooling air hoods are installed.

Warning! Risk of Fire! You must maintain clearances.

•Use only non-combustible framing material below standoffs.

•Sheetrock, wood or other combustibles must NOT be used as sheathing or facing in the non-combustible zone.

•Do NOT cover metal fireplace front with combustible materials.

•Install combustible materials only to specified clearances on top front and side edges.

•Complete framing and apply facing material (drywall) over framing.

•A bead of 300-deg F minimum non-combustible sealant must be used to close off any gaps at the top and sides between the fireplace and facing to prevent cold air leaks.

•Large gaps can be bridged with fiberglass rope gasket.

•Only non-combustible materials may be used to cover the metal fireplace front.

WARNING! Risk of Fire! Use only non combustible material when cooling hoods are not installed.

These surfaces

 

must be covered

 

with non-combustible

 

material.

Non-combustible

 

sealant.

Figure 9.1 Non-combustible Facing

 

Note: We recommend mortar be applied after facing materials are installed. Refer to Sec- tion 7.E

 

 

2 x 4 stud wall

Finished combustible wall

2 x 4 header, flush with

front of stand-offs

 

 

Non-Combustible material

 

 

Non-combustible

 

 

decorative facing

 

 

(up to full brick depth)

 

 

Continuous,

 

 

 

non-combustible sealant

 

Bottom of fireplace opening

 

 

 

Tile, stone or other

Hearth

and finished hearth may be

the same height

non-combustible material

Refractory

 

1 in. Micore

 

 

 

or equivilent

 

 

 

insulation &

Metal strips are placed 2 in. (51 mm)

 

1/2 in. Durock

Floor constructed of wood or

under the front of the fireplace and must

 

other combustible material

 

extend beyond the front and sides of

fireplace opening by 2 in. (51 mm)

Figure 9.2 Decorative Facing

Outdoor Lifestyles by Hearth & Home Technologies Inc. • 4070-300 Rev C • 4/11

25

Page 24 Page 26
Page 25
Image 25
Hearth and Home Technologies CASTLEWOOD 42 Finishing Material, Use only non-combustible framing material below standoffs
Page 24 Page 26

CASTLEWOOD 42 specifications

Hearth and Home Technologies has consistently been at the forefront of innovative fireplace solutions, and the CASTLEWOOD 42 is no exception. This exquisite linear gas fireplace is a perfect blend of modern design and advanced technology, making it a sought-after choice for homeowners looking to elevate their living spaces.

One of the standout features of the CASTLEWOOD 42 is its impressive 42-inch width, which allows it to serve as a stunning focal point in both contemporary and traditional interiors. The fireplace is designed with a sleek, clean appearance, featuring large viewing glass and a minimalist frame that creates an unobstructed view of the mesmerizing flames. With its flush-mount design, the CASTLEWOOD 42 can be easily incorporated into a variety of wall configurations, making it versatile enough for any room.

The CASTLEWOOD 42 is powered by advanced Direct Vent technology, ensuring efficient and safe operation. This system allows for the expulsion of combustion gases outside the home, while simultaneously drawing in fresh air for combustion. As a result, the fireplace operates cleanly, providing warmth without compromising indoor air quality. Additionally, the unit is designed to produce up to 30,000 BTUs, delivering sufficient heat to keep spaces cozy during chilly weather.

One of the most impressive aspects of the CASTLEWOOD 42 is its customizable options. Homeowners can choose from a variety of decorative media, such as glass rocks, driftwood, or ceramic logs, to personalize the fireplace and match their decor. The included LED accent lighting enhances the ambience by providing a soft glow that highlights the decorative elements, creating a warm and inviting atmosphere.

Remote control capability is another notable feature of the CASTLEWOOD 42, allowing users to effortlessly adjust the flame height and heat output from the comfort of their couch. Add-on options such as wall-mounted control panels or smartphone integration elevate convenience, ensuring that comfort is just a click away.

The CASTLEWOOD 42 not only excels in aesthetics and functionality but also adheres to high safety standards. With features like tempered glass and a secure venting system, it ensures peace of mind for families. Overall, the Hearth and Home Technologies CASTLEWOOD 42 stands as a testament to quality craftsmanship and innovative design, making it a brilliant addition to any home. Its combination of style, efficiency, and technology proves that fireplaces can be both functional and beautiful.
Top Page Image Contents