| CL36D AND CR36D INSTALLATION INSTRUCTIONS | |
| Table of Contents |
|
| Design and Installation Considerations | 3 |
A. Listings and Code Approvals | 4 | |
B. Description of the Fireplace System | 4 | |
C. Fireplace System Components | 5 | |
D. | 10 | |
E. | Chimney Requirements | 12 |
F. | Installation of Fireplace | 15 |
G. | Constructing a Chase | 22 |
H. | Operating Instructions | 25 |
I. | Maintenance Instructions | 29 |
| Index | 31 |
| Warranty | 32 |
CAUTION:
Do not expose the fireplace to the elements (i.e. rain, etc.) and keep the fireplace dry at all times. Wet insulation will produce an odor when the fireplace is used.
SAFETY PRECAUTIONS
1.Please read these installation instructions completely before beginning installation procedures. Failure to follow them could cause a fireplace malfunction resulting in serious injury and/or property damage.
2.Always check your local building codes prior to installation. The fireplace installation must comply with all local, regional, state and national codes and regulations.
3.An adequate supply of replacement combustion air from outside the house must be available to the fire for the fireplace to operate properly. To achieve this, the use of the optional outside air kit is highly recommended.
In the event the home is unusually tightly sealed, the optional combustion air kit may not provide all the air required to support combustion. Hearth Technologies Inc. is not responsible for any smoking or related problems that may result from the lack of adequate combustion air. It is the responsibility of the builder/ contractor to ensure that adequate combustion air has been provided for the fireplace.
4.This fireplace must be installed with the Hearth Technologies Inc. (HTI) SL Series Chimney System.
The chimney system must always terminate outside the building. Be sure to follow all chimney specifications given in these installation instructions.
5.NEVER leave children unattended when there is a fire burning in the fireplace.
6.This woodburning fireplace is built for solid fuel only. NEVER use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids in this fireplace. Keep any flammable liquids a safe distance from the fireplace.
7.DO NOT use chimney cleaners or flame colorants in your fireplace.
8.The flue damper must be open at all times when the fireplace is in use.
9.While servicing this fireplace, always shut off any electricity or gas to the fireplace. This will prevent possible electric shock or burns. Also, make sure the fireplace is completely cooled before servicing.
10.To ensure a safe fireplace system and to prevent the build up of soot and creosote, inspect and clean the fireplace and chimney prior to use and periodically during the burning season. See page 29 for cleaning instructions.
12538 Rev D | 2 |
