CL36D AND CR36D INSTALLATION INSTRUCTIONS

18.Position the Hearth Extension

Position and secure the hearth extension over the protective metal strips that have been placed partially under the fireplace front. These strips should be protruding approximately 2” from under the fireplace front and 2” on both sides of the fireplace opening.

Seal the crack between the hearth extension and fireplace with a bead of noncombustible sealant. See Figure 17. Apply a noncombustible finishing material of your choice to the hearth extension.

Figure 17 - Position the Hearth Extension

19.Finishing Material

Do not install combustible materials over the black face of the fireplace! This poses a safety hazard and may start a fire. You may only use noncombustible material over the black face of the fireplace.

a.Combustible Material

Material which is made of or surfaced with wood, compressed paper, plant fibers, plastics, or any material capable of igniting and burning, whether flame proofed or not, plastered or unplastered.

b.Noncombustible Material

Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or any combination thereof.

c.Noncombustible Sealant Material

Sealants which will not ignite and burn; General Electric RTV103 Black (or equivalent), Rutland, Inc. Fireplace Mortar #63 (or equivalent).

After completing the framing and applying the facing material (dry wall) over the framing, a ½” wide (maximum) bead of noncombustible sealant must be used to close off any gaps at the top and sides between the fireplace and facing to prevent cold air leaks.

Only noncombustible materials may be used to cover the black metal fireplace front.

20.Mantel

A combustible mantel may be positioned no lower than 41” above the platform or floor the fireplace is set on. The combustible mantel may have a maximum depth of 10”. See Figure 18. Combustible trim pieces that project no more than 1½” from the face of the fireplace can be placed no closer than 6” from the top and side of the fireplace opening. Combustible trim must not cover the black metal surfaces of the fireplace. This mantel clearance is in accordance with

Section 7-3.3.3 of ANSI/NFPA211.

Figure 18 - Mantel Position

21.Glass Doors

This fireplace has been tested and listed for use with doors as specified in Section C, “Fireplace System Components”. Please refer to the manual packed with each set of doors for installation instructions.

02-02

21

12538 Rev D

Page 20 Page 22
Page 21
Image 21
Hearth and Home Technologies CL36D, CR36D manual Position the Hearth Extension, Finishing Material, Mantel, Glass Doors
Page 20 Page 22

CR36D, CL36D specifications

Hearth and Home Technologies (HHT) has long been a leader in the fireplace market, and their CL36D and CR36D models exemplify the company's commitment to quality and innovation. Both models are part of the brand's extensive range of gas fireplaces, designed to offer an efficient and aesthetic heating solution for modern homes.

The CL36D, known for its linear design, measures 36 inches wide and is ideal for creating a stunning focal point in any living space. Its contemporary aesthetic features a clean face and a wide viewing area, allowing for an unobstructed view of the flames. The CR36D, on the other hand, brings a traditional touch with its classic stove-like appearance. This model can seamlessly integrate into various interior designs, catering to homeowners looking for a more classic or rustic focal point.

One of the standout features of both the CL36D and CR36D is their advanced burner technology. HHT has implemented a unique burner design that provides a realistic flame presentation, enhancing the overall ambiance of the space. These models also come equipped with an efficient heating system, capable of warming a substantial area while maintaining energy efficiency. The fireplaces utilize propane or natural gas as a fuel source, providing convenience and ease of use.

Another significant characteristic of these units is their versatility. Both the CL36D and CR36D can be customized with various media options, including traditional logs, glass beads, or contemporary stones. This flexibility allows homeowners to personalize their fireplace to match their unique style and preferences.

Safety features are also a priority for Hearth and Home Technologies. Both fireplaces are equipped with a safety shut-off system, ensuring that the unit will turn off in case of any malfunctions. Additionally, they can be integrated with optional remote controls and wall switches, allowing for easy operation from anywhere in the room.

In summary, the Hearth and Home Technologies CL36D and CR36D offer a blend of contemporary and traditional designs, advanced burner technology, energy efficiency, and customizable features. Whether you prefer a sleek, modern look or a more classic style, these models provide an exceptional heating solution while enhancing the aesthetic appeal of your home. With their impressive safety features and user-friendly operation, the CL36D and CR36D are excellent choices for anyone looking to invest in a high-quality gas fireplace.
Top Page Image Contents