CL36D AND CR36D INSTALLATION INSTRUCTIONS

D. PRE-INSTALLATION PREPARATION

1. Fireplace Locations and Space Requirements

Several options are available to you when choosing a location for your fireplace. This fireplace may be used as a room divider, installed along a wall, across a corner or used in an exterior chase. See Figure 2.

Locating the fireplace in a basement, near frequently opened doors, central heat outlets or returns, or other locations of considerable air movement can affect the performance and cause intermittent smoke spillage from the front of the fireplace. Consideration should be given to these factors before deciding on a location.

CLEARANCES!

A minimum ½” air clearance must be maintained at the back and side of the fireplace assembly.

Chimney sections at any level require a 2” minimum air space clearance between the framing and chimney section.

Figure 2 - Fireplace Locations

Figure 3 shows a typical installations assuming an outside air kit is being used. Therefore, an allowance must be made for 90° bends. Less space is required when ducting goes directly outside without forming elbows.

These are rough framing

dimensions only.

With

Without

Outside Air

Outside Air

 

 

A=44"

A=365/8"

Figure 3

Installation Along a Wall or an Exterior Chase

WARNING!

Do not draw outside air from garage spaces. Exhaust products of gasoline engines are hazardous.

Do not install outside air ducts such that the air may be drawn from attic spaces, basements or above the roofing where other heating appliances or fans and chimneys exhaust or utilize air. These precautions will reduce the possibility of fireplace smoking or air flow reversal.

WARNING!

To prevent contact with sagging or loose insulation, the fireplace must not be installed against vapor barriers or exposed insulation. Localized overheating could occur and a fire could result.

12538 Rev D

10

02-02

Page 9 Page 11
Page 10
Image 10
Hearth and Home Technologies CR36D, CL36D manual PRE-INSTALLATION Preparation, Fireplace Locations and Space Requirements
Page 9 Page 11

CR36D, CL36D specifications

Hearth and Home Technologies (HHT) has long been a leader in the fireplace market, and their CL36D and CR36D models exemplify the company's commitment to quality and innovation. Both models are part of the brand's extensive range of gas fireplaces, designed to offer an efficient and aesthetic heating solution for modern homes.

The CL36D, known for its linear design, measures 36 inches wide and is ideal for creating a stunning focal point in any living space. Its contemporary aesthetic features a clean face and a wide viewing area, allowing for an unobstructed view of the flames. The CR36D, on the other hand, brings a traditional touch with its classic stove-like appearance. This model can seamlessly integrate into various interior designs, catering to homeowners looking for a more classic or rustic focal point.

One of the standout features of both the CL36D and CR36D is their advanced burner technology. HHT has implemented a unique burner design that provides a realistic flame presentation, enhancing the overall ambiance of the space. These models also come equipped with an efficient heating system, capable of warming a substantial area while maintaining energy efficiency. The fireplaces utilize propane or natural gas as a fuel source, providing convenience and ease of use.

Another significant characteristic of these units is their versatility. Both the CL36D and CR36D can be customized with various media options, including traditional logs, glass beads, or contemporary stones. This flexibility allows homeowners to personalize their fireplace to match their unique style and preferences.

Safety features are also a priority for Hearth and Home Technologies. Both fireplaces are equipped with a safety shut-off system, ensuring that the unit will turn off in case of any malfunctions. Additionally, they can be integrated with optional remote controls and wall switches, allowing for easy operation from anywhere in the room.

In summary, the Hearth and Home Technologies CL36D and CR36D offer a blend of contemporary and traditional designs, advanced burner technology, energy efficiency, and customizable features. Whether you prefer a sleek, modern look or a more classic style, these models provide an exceptional heating solution while enhancing the aesthetic appeal of your home. With their impressive safety features and user-friendly operation, the CL36D and CR36D are excellent choices for anyone looking to invest in a high-quality gas fireplace.
Top Page Image Contents