CL36D AND CR36D INSTALLATION INSTRUCTIONS

DESIGN AND INSTALLATION CONSIDERATIONS

When selecting a location for your woodburning fireplace, it is important to evaluate a number of considerations. Modern construction techniques can create conditions that may not allow your chimney to draft properly. This may result in smoke spillage from your fireplace, as well as cause other combustion appliances to operate incorrectly.

Tightly sealed construction is important for energy efficiency. Unfortunately, a great deal of effort has been directed to tightening up sidewall construction, while considerably less attention has been paid to tightening upper portions of the warm air envelope (insulated ceilings). This has increased the “Stack Effect”, a condition that increases the negative pressure generated by the structure. This negative pressure will directly affect the drafting performance of a fireplace chimney. To minimize the negative pressure generated by stack effect, make certain that all ductwork installed in the attic spaces is sealed airtight. Minimize the number of recessed light fixtures installed in the insulated ceiling, and use sealed recessed light fixtures. Finally, make certain the whole house fans and attic access panels are tightly sealed. These are important design considerations that must be observed during the design and construction stage of the home.

If you desire to put a fireplace in your basement, we recommend that you consider a direct vent gas fireplace. Basements always have a significant negative air pressure that causes the fireplace system to be more susceptible to smoke spillage and cold flue backdrafting. Since direct vent gas fireplaces are sealed, they are not affected by the negative pressure that exists in basements.

Finally, woodburning fireplaces perform best when their chimney (roof termination) is located on the upper half of the roof, especially when cathedral ceilings are present. Chimneys that are located on the lower half of the roof realize what is known as “lazy flue” and will not draft as well as a chimney that is located in the upper portion of the roof. The reason for this is that the stack effect generated by the overall height of the living spaces inside the house will exceed the draft generated by the chimney system. If you desire to place a woodburning fireplace in a location where the termination cap would be located on the lower half of a roof, such as on an outside wall at the base of a cathedral ceiling, we recommend that you consider using a direct vent gas fireplace. This will assure the homeowner a fireplace that operates correctly.

These properties do not affect just your woodburning factory built fireplace. They can cause any woodburning fireplace as well as any conventionally vented (B-vent) gas appliance to operate improperly. Careful planning at this stage of your project will ensure satisfaction with the operation of your fireplace once it is completed.

02-02

3

12538 Rev D

Page 2 Page 4
Page 3
Image 3
Hearth and Home Technologies CL36D, CR36D manual Design and Installation Considerations
Page 2 Page 4

CR36D, CL36D specifications

Hearth and Home Technologies (HHT) has long been a leader in the fireplace market, and their CL36D and CR36D models exemplify the company's commitment to quality and innovation. Both models are part of the brand's extensive range of gas fireplaces, designed to offer an efficient and aesthetic heating solution for modern homes.

The CL36D, known for its linear design, measures 36 inches wide and is ideal for creating a stunning focal point in any living space. Its contemporary aesthetic features a clean face and a wide viewing area, allowing for an unobstructed view of the flames. The CR36D, on the other hand, brings a traditional touch with its classic stove-like appearance. This model can seamlessly integrate into various interior designs, catering to homeowners looking for a more classic or rustic focal point.

One of the standout features of both the CL36D and CR36D is their advanced burner technology. HHT has implemented a unique burner design that provides a realistic flame presentation, enhancing the overall ambiance of the space. These models also come equipped with an efficient heating system, capable of warming a substantial area while maintaining energy efficiency. The fireplaces utilize propane or natural gas as a fuel source, providing convenience and ease of use.

Another significant characteristic of these units is their versatility. Both the CL36D and CR36D can be customized with various media options, including traditional logs, glass beads, or contemporary stones. This flexibility allows homeowners to personalize their fireplace to match their unique style and preferences.

Safety features are also a priority for Hearth and Home Technologies. Both fireplaces are equipped with a safety shut-off system, ensuring that the unit will turn off in case of any malfunctions. Additionally, they can be integrated with optional remote controls and wall switches, allowing for easy operation from anywhere in the room.

In summary, the Hearth and Home Technologies CL36D and CR36D offer a blend of contemporary and traditional designs, advanced burner technology, energy efficiency, and customizable features. Whether you prefer a sleek, modern look or a more classic style, these models provide an exceptional heating solution while enhancing the aesthetic appeal of your home. With their impressive safety features and user-friendly operation, the CL36D and CR36D are excellent choices for anyone looking to invest in a high-quality gas fireplace.
Top Page Image Contents