MOTOR HOUSING Installation
Ceiling BRACKET Hardware (not to scale)
| Screw Pack (B) | Screw Pack (B) | |
| Motor Housing Mounting | ||
| Hole Plugs (4) | ||
Motor Housing | Screws (2) | ||
|
Step 3a. Locate and loosen the two motor housing mounting screws that are located on the side of the ceiling mounting bracket as shown in Figure #1.
Step 3b. Install the motor housing by aligning the two slots on the inside of the motor housing with the heads of the two mounting screws that are mounted on each side of the ceiling mounting bracket as shown in Figure #2. Then rotate the motor housing counter clockwise until the heads of the two screws on the ceiling mounting bracket lock together, attaching the motor cover to the ceiling plate as shown in Figure #3.
NOTE: When aligning the screws, center the motor housing so that there is an even amount of space all around the motor.
Motor Cover
Mounting Screws
Ceiling
Mounting
Bracket
Figure #1
Motor Cover
Mounting Screws
Mounting
Slots
Figure #2 | Figure #3 |
10
