BLADE PREPARATION AND INSTALLATION
Blade Hardware (not to scale)
Blades (5) | Blade Irons (5) | Blade Medallions (5) |
|
|
Screw Pack C | Screw Pack D |
Blade Screws (21) | Blade Iron Screws (11) |
Step 4a. Attach blade to bladeholder by first pressing the blade badge onto the blade (Pack C), then attaching the bladeholder using the four blade screws provided as shown in Figure #1. Using the provided screwdriver, tighten securely by hand only. Repeat for each blade assembly.
Blade Screws
Blade Iron
Blade Badge
Step 4b. Attach each blade/bladeholder assembly to the motor by threading two blade iron screws (Pack
D)through the matching holes in the blade iron and the motor as shown in Figure #2. Using the Phillips screwdriver, tighten the screws loosely. After all five blade assemblies have been installed, tighten the screws with the screwdriver as shown in Figure #3.
Figure #1
Motor
Blade Iron
and Blade
Figure #2
Figure #3
12
