Motor Installation
Step 2a. Attach one of the hooks on the outside of the motor onto one of the loops hanging from the ceiling bracket as shown in Figure #1.
Step 2b. Trim excess motor wires to six inches and attach the fan wires to the ceiling bracket wiring by placing the bare end of the wires side by side and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
•GREEN leads from ceiling bracket and motor to GROUND conductor of power source. Secure with wire nut as shown in Figure #2.
•WHITE wire from fan to white NEUTRAL wire in ceiling bracket to the WHITE NEUTRAL conductor wire from the power source. Secure with wire nut as shown in Figure #2.
•BLACK wire from fan to BLACK wire in ceiling bracket to the BLACK conductor wire from the power source. Secure with wire nut as shown in Figure #2.
Ceiling
Bracket
Loops
Motor
Hook
2 White
Wires
2Black Wires
Motor
Hook
Ceiling
Bracket
Loop
Figure #1
3 Green
Wires
Figure #2
8