Vermont®
Ceiling bracket Preparation and Installation
Ceiling BRACKET Hardware (not to scale)
Screw Pack A: 11/2" x
Roundhead screws (2),
washers (2),Phillips Screwdriver
Ceiling Mounting Bracket | Motor Assembly |
Screw Pack A: | Screw Pack A: |
11/2" Wood Screws (2), | Wire Nuts (4), |
washers (2), |
|
Screw Pack A: 3" Wood screws (2)
washers (2),
Ceiling bracket Bracket Installation
Step 1. Route the outlet box wires through the center hole of the ceiling bracket. Attach the ceiling bracket to the outlet box with the mounting hardware included with the outlet box, ensuring that the outlet box wires are not pinched by the washers or between the mounting bracket and the ceiling.
CAUTION:
To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the ceiling bracket.
7