3.Locate the two PCI Express x1 slots on the system board. See “Locating parts on the system board” on page 12.
4.Install the WiFi adapter card into one of the two PCI Express x1 slots. Then install the screw to secure the WiFi adapter card in place.
Figure 49. Installing the WiFi adapter card
What to do next:
•To work with another piece of hardware, go to the appropriate section.
•To complete the installation or replacement, go to “Completing the parts replacement” on page 67.
Installing or removing the rear WiFi antenna
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v.
This section provides instructions on how to install or remove the rear WiFi antenna.
Installing the rear WiFi antenna
To install the rear WiFi antenna, do the following:
1.Turn off the computer and disconnect all power cords from electrical outlets.
2.Install the rear WiFi antenna to the rear WiFi antenna cable connector attached on the rear of the computer.
