Vermont Casting C34G624M owner manual Vermont, Introduction Before You Start, Safe Use

Vermont®

Introduction

Before You Start

•CAUTION: RISK OF ELECTRICAL SHOCK! Installation is to be in accordance with the National Electrical Code,

ANSI/NFPA 70-1999, and local codes. If you are unfamiliar with the wiring codes, you should use a qualified electrician. To avoid overheating and possible damage to other equipment, do not install control to a receptacle, fluorescent light fixture, motor-operated appliance, or transformer-supplied appliance.

•This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations. If it is not, a new box must be installed.

•This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum current requirement for the fan with light fixture is 2.17 amps. The fan uses about .71 amp or 85 watts.

Maximum light current is about .83 amps or 100 watts of lighting.

•Where wire nuts are employed, be sure all bare wires are within the connectors.

•WARNING: Do not bend the blade brackets when installing the brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between the rotating fan blades.

Unpacking

Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed in the Parts Guide. Before discarding packaging materials, be certain that all parts have been removed.

For best performance and for your warranty to be valid,

use only genuine Casablanca blades, light fixtures, and accessories.

Safe Use

•The blades in each pack are matched for equal weight to assure smooth fan operation. If more than one fan is being installed, be careful not to mix blades from different cartons.

•Inspect the contents of your carton for possible shipping or handling damage. If parts are missing or damaged, call 1-888-227-2178.

•It is always a good idea to have an assistant to help with the installation.

•When cleaning, painting, or working near your fan, be very careful of the fan and blades. Always turn the power OFF to the ceiling fan before working on it or replacing lightbulbs.

•Never insert anything into the path of the fan blades while the fan is in operation.

•Never install a fan over a pool or spa.

•Never operate a fan that has been damaged in any way. For assistance in obtaining service, call Casablanca Fan Company at 1-888-227-2178 or contact your local authorized Casablanca dealer.

Fuse Box	Circuit Breaker
(Remove fuse for the	(Trip breaker for the
circuit you will be	circuit you will be
working on)	working on)

from wall to end of blade

18" ­

70"­

from wall to

center of fan 84" ­from bottom edge of blade to floor

Dimensions indicated are the minimum allowable for proper installation.

5