Listings and Code Aprovals | Hearth and Home Technologies GBI25

GBI25 SERIES B-VENT GAS FIRED FIREPLACE INSERT

A. LISTINGS AND CODE APROVALS

U.S. AND CANADA CERTIFICATION

This appliance has been tested in accordance with ANSI Z21.11.1-1991, CAN/CGA 1-2.1-MB6 and applicable sections of ANSI Z21.50-1996 CAN/CGA 2.22-M96 and has been LISTED by Underwriters Laboratories Inc. for installation and operation as described in these Installation and Operating Instructions. All components are UL. AGA, CGA or CSA safety certified.

LOCAL CODES

Check with your local building code agency prior to installing this appliance to ensure compliance with local codes, including the need for permits and follow-up inspections. This installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1-latest edition in the U.S.A. and the CANI-B149-latest edition in Canada. The appliance, when installed, must be electrically grounded

in accordance with local codes; in the absence of local codes, with the current National Electric Code ANSI/FNPA No. 70 (in the U.S.A.) or with the current CSA C2.1 Canadian Electric Code in Canada.

FUEL

Any additions, changes or conversions required in order for the appliance to satisfactorily meet the application needs, must be made by a qualified service technician using factory specified and approved parts.

If you require assistance during installation, please contact your local dealer or the Heatilator Technical Services Department, Hearth Technologies Inc., 1915 W. Saunders Street, Mt. Pleasant, Iowa 52641 (1-800-843-2848).

HEATILATOR® is a registered trademark of Hearth Technologies Inc. (HTI), a division of HON INDUSTRIES.

B. DESCRIPTION OF THE SYSTEM

The GBi25 Series is a B-vent gas-fired room heater. Combustion air is supplied from inside the house.

This HEATILATOR system must consist of the following:

1.Appliance

2.B-Vent Venting System

3.Termination

4.Surround

Tools and building supplies normally required for installation:

Saw	Wall-finishing materials
Pliers	Framing material
Hammer	Surround
Phillips screwdriver	Caulking material
Tape measure	Safety gloves
Plumb line	Electric drill/bits
Level	Framing Square

We strongly recommend that you DO NOT install B-Vent Gas Appliances in strong negative air locations, such as a basement or a public facility. Living rooms with cathedral ceilings could be susceptible to a negative air situation, but such installations can be overcome through raising the termination, depending on specific installations. This fireplace uses room air for normal operation and could have problems establishing a positive draft in negative air locations. In lieu, we recommend a direct vent appliance.

Note: Illustrations throughout these instructions reflect typical installations and are for design purposes only. Actual installation may vary slightly due to individual design preferences. However, minimum and maximum clearances must be maintained at all times.

The illustrations and diagrams used throughout these installation instructions are not drawn to scale.

HIGH TEMPERATURE SEALANT MATERIAL

Sealants that will withstand high temperatures: General Electric RTV103 (Black), or equivalent. Rutland, Inc. Fireplace Mortar #63 or equivalent; Dow Corning 732 or equivalent.

02-02

26678 Rev H

GBI25 specifications

Hearth and Home Technologies has garnered a strong reputation for producing high-quality, efficient, and stylish heating solutions for homes, and the GBI25 model exemplifies this commitment. The GBI25 is a gas-burning insert specifically designed to fit seamlessly into existing masonry fireplaces, transforming traditional hearths into modern heating powerhouses while preserving the aesthetic appeal of classic designs.

One of the standout features of the GBI25 is its high-efficiency performance. With an impressive efficiency rating, this insert is constructed to ensure that more heat is generated from less energy, allowing homeowners to enjoy cozy warmth while keeping fuel costs down. The insert’s high BTU output makes it suitable for heating a range of spaces, providing a perfect option for those looking to enhance their living environments.

The GBI25 is equipped with advanced technology that includes an integrated electronic ignition system. This feature simplifies the lighting process, eliminating the need for matches or kindling. Furthermore, the insert is designed with a variable speed blower that can be adjusted according to the homeowner's needs, distributing heat evenly and efficiently throughout the room.

Aesthetically, the GBI25 does not compromise on style. It offers a range of customizable options, including various front designs, finishes, and decorative elements. Homeowners can choose from classic arched or modern linear styles, allowing the insert to blend seamlessly with any décor. The realistic log set and glowing ember bed enhance the visual warmth of the fire, creating a captivating centerpiece in any living space.

Safety remains a top priority with the GBI25. It comes with a built-in safety shut-off system, ensuring peace of mind during operation. Additionally, the insert is equipped with a glass front, which prevents direct contact with the flames, making it safer for homes with children and pets.

Overall, the Hearth and Home Technologies GBI25 gas insert combines efficiency, safety, and style, making it a stunning and practical choice for homeowners looking to elevate their living spaces. Whether for ambiance or heating, the GBI25 provides an exceptional solution for enjoying the comfort of a stylish fire.

Hearth and Home Technologies GBI25 Listings and Code Aprovals, Description of the System

Models: GBI25