1. | Install the Fan Bracket & Shield | • If no fan shield is needed, install screws to hold the front |
• | Place the fan bracket around the fan. See Figure 1. | of the fan bracket in place. See Figure 4. |
|
Figure 1 Fan Bracket-No screws
|
|
Figure 4 | Fan Bracket |
|
|
•Use pliers to crimp the bracket tabs around the fan housing. See Figure 2.
|
| • |
Figure 2 | Crimp Bracket Tabs |
•If the fan is being installed in a
|
|
Figure 3 | Fan Shield |
|
|
Figure 5 | Foam Tape |
Attach the foam tape (Figure 5) and magnets (Figure 6) to the fan. Cut one magnet strip in half and save the remaining strip for control module.
|
|
Figure 6 | Magnets |
2 | Hearth & Home Technologies • GFK21B Fan Kit • |