HRV200PLUS INSTALLATION INSTRUCTIONS

3.Fresh Air Fireplace Exhaust - Stale air/combustion products from the FAF to the HRV Duct Materials: CoolVent™ Flexible Pipe (1” air clearance to combustible materials)

Firestops, Hangers and Accessories as Required a. Fresh Air Fireplace Exhaust Guidelines

1)FAF must be vented with CoolVent™ flexible insulated vent pipe, maintaining 1” (25.4mm) clearance to combustible

 

￿￿

￿

￿￿￿￿￿

￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿

 

surfaces.

 

 

 

 

 

 

 

 

 

 

 

 

Note: 1” (25.4mm) air clearance to combustibles must be maintained

 

 

 

 

 

 

when using CoolVent™ in this portion of the venting system.

 

 

 

2)

The total combined length of the CoolVent™ run for the Fireplace Exhaust and the HRV Exhaust must not exceed the

 

maximum lengths shown in the following table:

 

 

 

 

 

 

3)

Direction of flow may include any combination horizontal, vertical up or vertical down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

 

 

4)The entire vent run must be contained within an area which will not experience temperatures below 40°F.

WARNING!

The maximum TOTAL EXHAUST vent run is measured from the flue collar of the Fresh Air Fire- place, through the HRV, to the outside termination. DO NOT EXCEED MAXIMUM VENTING LENGTHS!

b.Attaching the CoolVent™ to the Fresh Air Fireplace Flue Collar

1)Secure a CoolVent™ appliance connector to the CoolVent™ insulated flexible pipe per the manufacturer’s instructions.

2)Apply a generous bead (1/2 inch) of RTV high temperature silicone to the flue collar and attach the appliance adaptor.

c.Assembling the Vent Pipe Sections

1)When it is necessary to connect two or more lengths of CoolVent™ insulated flexible pipe in a vent run, use a universal connector at each joint.

2)Always support CoolVent™ insulated flexible pipe every three feet.

WARNING!

When vent sections exceed three feet (.9m) in length ensure minimum clearances are maintained. Structural support must be provided to reduce off-center loading. Follow manufacturer installation instructions..

14

4034-102 Rev F

02/04

Page 14
Image 14
Hearth and Home Technologies HRV200PLUS manual Assembling the Vent Pipe Sections

HRV200PLUS specifications

The Hearth and Home Technologies HRV200PLUS is an advanced heat recovery ventilator (HRV) designed to provide optimal indoor air quality while ensuring energy efficiency. As homes become increasingly airtight due to modern construction techniques, the importance of proper ventilation grows. The HRV200PLUS addresses this need by continuously exchanging stale indoor air with fresh outdoor air, effectively maintaining a healthy living environment.

One of the standout features of the HRV200PLUS is its innovative heat recovery technology. This system captures the heat from the outgoing air and transfers it to the incoming fresh air. As a result, the air being brought into the home is pre-warmed, reducing the demand on heating systems during the colder months. This energy-efficient method helps homeowners save on heating costs while maintaining comfort levels inside the home.

Another notable characteristic of the HRV200PLUS is its quiet operation. Equipped with high-performance, low-noise fans, this unit operates in silence, ensuring that occupants can enjoy a peaceful environment without the disruptive sounds often associated with ventilation systems. Additionally, the HRV200PLUS provides versatile installation options, allowing it to be easily integrated into both new and existing homes.

The unit features adjustable settings that allow users to customize airflow according to their specific needs. With multiple fan speeds, homeowners can choose the most suitable option for their daily activities, ensuring an ideal balance between indoor air quality and energy use. Furthermore, the HRV200PLUS includes a built-in filter system that captures dust, allergens, and other airborne particles, enhancing overall air quality.

Durability and ease of maintenance are also keys in the design of the HRV200PLUS. Constructed with high-quality materials, this unit is made to last, reducing the need for frequent replacements. The filters are easily accessible, making periodic maintenance straightforward, which further extends the product's lifespan.

In summary, the Hearth and Home Technologies HRV200PLUS stands out as a premium choice for homeowners seeking a reliable and efficient ventilation solution. Its combination of heat recovery technology, quiet operation, customizable settings, and easy maintenance make it an ideal option for improving indoor air quality while keeping energy costs in check. As the emphasis on healthy living spaces continues to grow, the HRV200PLUS remains a practical investment for modern homes.