28 Heatilator • Novus NBV • 4055-188 Rev C • 04/08
Latches
(both bottom
and top)
Glass
Assembly
Figure 12.11 Glass Assembly
M. Install Floor CoverInstall the fl oor cover as shown in Figure 12.10.
N. Fixed Glass AssemblyRemoving Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fi xed glass as-
sembly with care. Inspect the gasket to ensure it is undam-
aged and inspect the glass for cracks, chips or scratches.
DO NOT:
• Strike, slam or scratch glass
• Operate fi replace with glass removed, cracked, bro-
ken or scratched.
Replace fi xed glass assembly as a complete assembly.
• Remove screen.
• Pull the four (30/33/36 in. appliances) or seven (42 in.
appliance) glass assembly latches out of the groove on
the glass frame. Refer to Figure 12.11.
• Remove the glass assembly from the appliance.
Replacing Fixed Glass Assembly
• Set the glass panel on the lower two or four glass assembly
latches, ensuring the glass panel is centered in the
opening.
• Replace screen
O. Close the Screen AssemblyRotate the screen closed. See Figures 12.12 and 12.13.
Figure 12.10 Installing Floor Cover
Figure 12.12 Closing Screen
Figure 12.13 Closing Screen
Note: The fl oor cover in the bottom front of the fi replace
may be covering the UL labels. It is loose and can be
removed/replaced.