Hearth and Home Technologies MBK Yosemite Wood Stove FLOOR PROTECTION, Side Fuel Door Locked Shut

R

Yosemite Wood Stove

FLOOR PROTECTION

Minimum Hearth Requirements ONLY

See page 6 for stove clearances

The floor must be non-combustible material, extending beneath heater and to the front/sides/rear as indicated. The floor must be non-combustible or otherwise adequately protected from radiant heat given off by the unit and from sparks and falling embers. A layer of thin brick or ceramic tile over a combustible floor is not sufficient.

In USA installations, it is necessary to install a non-combustible floor protector at least 16 inches in front and 8 inches to both sides of the fuel loading doors. See *exception below.

In Canada, similar floor protection must be provided 18 inches (450mm) in front and 8 inches (200mm) from the sides and rear of the stove. See *exception below.

*EXCEPTION: Non-combustible floor protections must extend beneath the flue pipe when installed with horizontal venting and extend 2 inches (51mm) beyond each side.

DRAWINGS ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT TO SCALE.

SIDE FUEL DOOR LOCKED SHUT

10-1/2"		200mm (8")
(267mm)
	200mm	200mm
	(8")	(8") 1187mm
		(46-3/4")
Front Fuel		Minimum
loading door	36-3/4"
	(933mm)
	Minimum	450mm (18")
8"
16" (406mm) from fuel (200mm)		CANADA
loading door
USA	1010mm (39-3/4")Minimum

33"(838mm) Minimum

BOTH FUEL DOORS ACCESSIBLE

	8"(200mm)
Fuel loading doors
Front	Side
8"	Minimum 16"
	(406mm) from
(200mm)
	fuel loading
	door

USA

44-1/2"(1130mm) Minimum

200mm (8")

	200mm	Fuel loading doors
36-3/4"	(8")
		Front	Side	1187mm
(932mm)
Minimum				(46-3/4")
				Minimum

Minimum 450mm (18") from each

fuel loading door

CANADA

1264mm (49-3/4")Minimum

7004-187F September 1, 2008 Page 7