R

Santa Fe Pellet Insert

G. Ignition Cycles

1.During each ignition cycle, it is normal to see some smoke in the firebox. The smoke will stop once the fire starts.

2.The convection blower will automatically turn on after your appliance has reached the set temperature. This blower transfers heat from your appliance into the room, and will continue to run after the thermostat has stopped calling for heat until the appliance has cooled down.

3.Occasionally the appliance may run out of fuel and shut itself down. When this happens, the red call light will be on. To restart it, fill the hopper and press the reset button. When you press the reset button the red call light will go out. Release the button and the light will come back on. You should see a fire shortly. If not, follow the instructions on page 25, “Starting Your First Fire”.

CAUTION

Odors and vapors released during initial operation.

•Curing of high temperature paint.

•Open windows for air circulation.

Odors may be irritating to sensitive individuals.

WARNING

Fire Risk

Do NOT operate appliance:

•With appliance door open.

•Firepot floor open.

•Cleaning slide plates open. Do NOT store fuel:

•Closer than required clearances to com- bustibles to appliance

•Within space required for loading or ash removal.

Back side of Firepot

Firepot floor left open

 

 

 

Figure 26.1 - DO NOT LEAVE FIREPOT FLOOR OPEN

H. Frequently Asked Questions

 

 

 

 

 

 

 

ISSUES

 

SOLUTIONS

1.

Metallic noise.

1.

Noise is caused by metal expanding and contracting as

 

 

 

it heats up and cools down, similar to the sound pro-

 

 

 

duced by a furnace or heating duct. This noise does not

 

 

 

affect the operation or longevity of your appliance.

 

 

 

 

2.

Ash buildup on glass.

2.

This is normal. Clean the glass.

 

 

 

 

3.

Glass has turned dirty.

3.

Excessive build up of ash. The lower burn settings will

 

 

 

produce more ash, the higher burn settings produce

 

 

 

less. The more it burns on low the more frequent clean-

 

 

 

ing of the glass is required.

4.

Fire has tall flames with black tails and is lazy.

4.

The feed rate needs to be reduced or the firepot needs

 

 

 

cleaning. Heat exchanger or exhaust blower needs

 

 

 

cleaning.

5.

Smokey start-up or puffs of smoke from the airwash.

5.

Either the firepot is dirty or there is too much fuel at

 

 

 

start-up and not enough air. Close down feed rate 1/4

 

 

 

(6mm) inch at a time until this no longer happens.

 

 

 

 

6.

Large flame at start-up.

6.

This is normal. Flame will settle down once the fire is

 

 

 

established.

 

 

 

 

Page 26

7019-205C

September 1, 2008

Page 25 Page 27
Page 26
Image 26
Hearth and Home Technologies SANTAFEI-B owner manual Santa Fe Pellet Insert Ignition Cycles, Frequently Asked Questions
Page 25 Page 27

SANTAFEI-B specifications

Hearth and Home Technologies SANTAFEI-B is a standout fireplace option renowned for its intelligent design, efficiency, and ease of use. This innovative fireplace blends modern technology with classic aesthetic appeal, making it a popular choice for homeowners seeking ambiance and functionality.

One of the standout features of the SANTAFEI-B is its high-efficiency design. With an efficiency rating that significantly exceeds traditional fireplaces, this model maximizes heat output while minimizing fuel consumption. This efficiency not only translates into lower heating bills but also means that the energy used is effectively converted into warmth for your living space.

The SANTAFEI-B incorporates advanced technology such as the IntelliFire™ ignition system, which offers easy start-up and reliable operation. This technology simplifies the process of lighting the fire and maintaining it, allowing users to enjoy a warm and inviting atmosphere with minimal effort. Additionally, the system is equipped with remote control options for enhanced convenience, enabling users to adjust the flames and heat from the comfort of their seat.

Design-wise, the SANTAFEI-B is available in various styles and finishes, ensuring it can seamlessly fit into any home decor. The customizable options allow homeowners to express their personal style, whether they prefer a sleek modern look or a more traditional aesthetic. The large viewing area provides a stunning display of the flames, creating an inviting focal point in any room.

Moreover, the fireplace is fitted with a variety of safety features that make it a reliable choice for families. These features include safety screens and automatic shut-off mechanisms that ensure peace of mind when using this appliance.

In terms of maintenance, the SANTAFEI-B is designed for easy cleaning and upkeep. Durable materials are used in its construction, which not only enhances its longevity but also makes it simple to maintain its appearance.

In summary, Hearth and Home Technologies SANTAFEI-B is a sophisticated fireplace that combines efficiency, modern technology, and stylish design. With features designed for safety and convenience, it stands out as an excellent choice for anyone looking to enhance their home with a beautiful and functional heating solution. The SANTAFEI-B truly represents the best of both worlds, marrying warmth and comfort with contemporary living.
Top Page Image Contents