7 Heater Setup

A. Remove Shipping Materials

Cut and discard the ties bundling the firescreen.

Remove screws holding ember bed shipping tabs in place.

Remove the tabs and discard. Replace the screws.

Remove the grate from the shipping pack and slide into place. See Figure 2

Remove the upper louver assembly from the pack and slide notches over screws in column. See Figure 3.

Remove the lower louver assembly from the pack and install as shown in Figure 4.

Figure 7.3 Upper Louver Assembly

Figure 7.1 Shipping Pack

Figure 7.4 Lower Louver Assembly

Figure 7.2 Grate In

14

Heatilator • SILHOUETTE Series Electric Fireplace • 4030-780 Rev F • 10/06

Page 14
Image 14
Hearth and Home Technologies SILH50EV-B, SILH50E-B, SILH60E-B, SILH50ENH-B Heater Setup, Remove Shipping Materials