Heat & Glo LifeStyle GRAND-XTS, SUPREME-XTS Log Set Assembly LOGS-SXT, Positioning the Logs

E. Positioning the Logs

If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions.

CAUTION: Logs are fragile! Carefully remove the logs from the packaging.

Log Set Assembly: LOGS-SXT

1

4

3

2 6

5

PILOT BURNER BASEPAN

GRATE

TABS

1

1

LOG #1 (SRV349-701):Place log #1 in the back of the insert. Locate the legs of the log outside the 3/8" tabs to either side of the burner. Pull the log forward until the log is stopped by the back edge of the burner.

349-935 1/02

Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev. i • 12/09 21