6 Gas Information

A. Fuel Conversions

C. Gas Connection

Before making gas connections ensure that appliance being installed is compatible with the available gas type.

Any natural or propane gas conversions necessary to meet the appliance and locality needs must be made by a quali- fied technician using Hearth & Home Technologies speci- fied and listed gas conversion kit.

NOTE: Have the gas supply line installed in accordance with local building codes, if any. If not, follow ANSI 223.1. Installation should be done by a qualified installer approved and/or licensed as required by the locality. (In the Commonwealth of Massachusetts installation must be performed by a licensed plumber or gas fitter.)

B.Gas Pressures

Proper input pressures are required for optimum appliance performance. Gas line sizing requirements need to be made following NFPA51.

WARNING

Fire Risk.

Explosion Hazard.

High pressure will damage valve.

•Disconnect gas supply piping BEFORE pressure testing gas line at test pressures above 1/2 psig.

•Close the manual shutoff valve BEFORE pressure testing gas line at test pressures equal to or less than 1/2 psig.

WARNING

Verify inlet pressures.

•High pressure may cause overfire condition.

•Low pressure may cause explosion.

•Verify minimum pressures when other household gas appliances are operating.

Install regulator upstream of valve if line pressure is greater than 1/2 psig.

NOTE: A listed (and Commonwealth of Massachusetts ap- proved) 1/2 inch (13mm) T-handle manual shut-off valve and flexible gas connector are connected to the 1/2 inch (13mm) control valve inlet.

•If substituting for these components, please consult local codes for compliance.

Refer to Reference Section 13 for location of gas line ac- cess in appliance.

NOTE: Gas line may be run from either side of the appliance provided the hole in the outer wrap does NOT exceed 2-1/2 inches in diameter and does not penetrate the firebox.

WARNING

Gas Leak Risk

•Support control when attaching pipe to prevent bending gas line.

NOTE: The gap between the supply piping and gas access hole may be caulked with high temperature caulk or stuffed Í with non-combustibleun-faced insulation to prevent cold air infiltration.

Pressure requirements for appliance are shown in the table below. Minimum pressures must be met when other household gas appliances are operating.

Pressure

Natural Gas

Propane

Minimum

5.0 inches

11.0 inches

Inlet Pressure

w.c.

w.c.

Maximum Inlet

14.0 inches

14.0 inches

Gas Pressure

w.c.

w.c.

Manifold

3.5 inches

10.0 inches

Pressure

w.c.

w.c.

 

 

 

12

Heat & Glo LifeStyle Collection • Twilight-II • 2087-900 Rev. G • 12/05

Page 11 Page 13
Page 12
Image 12
Heat & Glo LifeStyle TWILIGHT-II owner manual Gas Information, Fuel Conversions Gas Connection, Gas Pressures
Page 11 Page 13

TWILIGHT-II specifications

The Heat & Glo LifeStyle TWILIGHT-II is a revolutionary gas fireplace that delivers an unparalleled ambiance and efficiency to modern living spaces. With its sleek design and cutting-edge technology, it serves as the perfect centerpiece for any room while providing warmth and comfort.

One of the standout features of the TWILIGHT-II is its unique, see-through design, allowing users to enjoy the mesmerizing flames from multiple angles. This flexibility not only enhances the aesthetic appeal of any space but also creates a cozy atmosphere, making it perfect for both entertaining guests and enjoying quiet evenings at home.

The TWILIGHT-II is equipped with advanced ignition technologies, such as the IntelliFire Touch system, which ensures a reliable and easy start every time. This user-friendly touch-sensitive control allows homeowners to ignite the fireplace with a simple press. Furthermore, the system is designed to enhance safety by providing electronic ignition and a backup battery system, ensuring the flames can be lit even during power outages.

Another remarkable characteristic of the TWILIGHT-II is its impressive heat output. With the capacity to generate up to 40,000 BTUs, this fireplace efficiently warms large areas, making it an ideal solution for both residential and commercial spaces. The adjustable flame height is another feature that lets homeowners customize their experience, whether they desire a romantic flicker or a more robust display of flames.

Energy efficiency is a priority with the TWILIGHT-II, which is designed with vent-free technology that maximizes heat retention and minimizes heat loss. The fireplace carries a high efficiency rating, which not only contributes to cost savings on energy bills but also reduces environmental impact.

Additionally, the TWILIGHT-II offers a variety of customizable options to suit individual tastes. With multiple media options such as glass beads, driftwood, and various color choices for the interior, users can create a truly personalized look that complements their décor.

In summary, the Heat & Glo LifeStyle TWILIGHT-II embodies modern fireplace design and technology. With its elegant aesthetics, innovative ignition systems, exceptional heating capabilities, and customizable features, it stands out as a premier choice for homeowners seeking to enhance their living environment. Whether hosting gatherings or enjoying a serene evening alone, the TWILIGHT-II provides the perfect solution to all your heating and aesthetic needs.
Top Page Image Contents