![9.OPERATION](/images/new-backgrounds/32526/3252631x1.webp)
9.OPERATION
9.4 Timer Setting Procedure
ON-TIMER Program Setting:
When the unit is OFF, you can program the ON TIMER to start the unit after desired number of hours. Procedure:
Preset desired operation mode.
Press TIMER button. Digit “3” will flash on LED display.
TIMER LED indicator will illuminate.
Press or
button to desired hours. Number of hours will appear on LED
or button signals completion of timer programming.
Number of hours on LED display will count down as time lapses. When the display shows “0” , meaning programmed hour expires, the product will start operation in the preset mode. If you do not preset mode before setting ON TIMER, the unit will start in the mode of last operation.
HOW TO CANCEL
Press TIMER button. |
| Press TIMER button again. |
Number of hours will |
| Number of hours will disappear on |
flash on LED display |
| LED display. TIMER LED |
|
| indicator light will turn off. |
|
|
|
Press TIMER button. Digit “3” will flash on LED display.
TIMER LED indicator will illuminate.
Press or
button to
your desired hours. Number of hours will appear on LED display.
pressing or
button signals completion of timer programming. Indicator will illuminate.
When the programmed hour expires, the product will stop.
HOW TO CANCEL
Press TIMER button. Number of hours will flash on LED display
Press TIMER button again. TIMER LED indicator will turn off. Set temperature will appear on LED display.
16
Heat Controller, Inc. 1900 Wellworth Avenue Jackson, MI 49203