8.INSTALLATION
8.1Installation Procedures
1.Measure the window the unit will be installed into and adjust the telescoping Window Panels to fit into the window. If window is either too wide or too tall, fill the remaining space with foam or other appropriate material. Make sure that the holes on the Window Panel are exposed for connection of Window Kit Adaptor.
2.Screw the hose clockwise into the Terminal End, and the other end of the hose to the Window Kit Adaptor. Apply same procedures to both air inlet hose and air outlet hose.
3.Secure the Terminal End to the Exhaust Port. Apply same procedures to both air inlet hose and air outlet hose.
4.Connect the Window Kit Adaptor to each of the holes on the Window Panel.
VERTICALHORIZONTAL
11
Heat Controller, Inc. 1900 Wellworth Avenue Jackson, MI 49203
