B. MAINTENANCE AND OPERATION

1.All access panels must be in place when unit is in operation.

2.For maximum efficiency, the condenser coil must be kept clean. Periodic inspections, depending on local conditions are recommended. If it is necessary to clean the con- denser coil, use a common garden hose.

3.Never operate the unit without filters installed in the air handler.

4.If a compressor crankcase heater is used, it must be turned on 12 hours prior to start- ing the compressor.

1. CONTACTOR

The contactor is an electrical switch which operates the compressor and condenser fans. Its 24 volt coil is activated either directly or indirectly by the room thermostat.

2. HIGH PRESSURE SWITCH (HPC)

Opens the contactor (24 volt) circuit on high refrigerant pressure—Manual Reset—check for cause of tripping before putting unit back in service.

3. LOW PRESSURE SWITCH (LPC)

Acts as safety against loss of refrigerant and low evaporator temperatures.

4. PRE-START CHECK

PRE-START CHECK

1.

Is condensing unit properly located and level?

10.

Is refrigerant tubing neatly run and suction line thoroughly

2.

Is air free to travel to and from condensing unit?

 

insulated?

11.

Is condensate drain line properly sized, run, trapped and

3.

Is the wiring correct and according to the unit wiring dia-

 

pitched?

 

gram?

 

 

12.

Are refrigerant connections tight and leak tested?

4.

Are wiring connections tight? (Including those in unit and

13.

Is filter clean and in place?

 

compressor electrical box.)

5.

Is the unit properly grounded?

14.

Does the condenser fan turn free without rubbing?

6.

Is circulating air blower correctly wired?

15.

Is the fan tight on the fan shaft?

7.

Is condensing unit properly fused?

16.

Are all covers and access panels in place to prevent air

8.

Is the thermostat level, correctly wired and in a good loca-

 

loss?

17.

Are refrigerant valves open for full flow?

 

tion?

9.

Is the ductwork correctly sized, run, taped and insulated?

 

 

21

Page 20 Page 22
Page 21
Image 21
Heat Controller R-410A Maintenance and Operation, Contactor, High Pressure Switch HPC, LOW Pressure Switch LPC
Page 20 Page 22

R-410A specifications

The Heat Controller R-410A is an advanced refrigerant used in various heating and cooling applications, particularly in residential and commercial air conditioning systems. Recognized for its efficiency and eco-friendliness, R-410A has become a popular choice among HVAC manufacturers and professionals.

One of the main features of R-410A is its high efficiency. It operates at a higher pressure than traditional refrigerants, which allows it to transfer heat more effectively. This results in improved energy efficiency ratings (SEER and EER) for systems utilizing R-410A, leading to lower energy bills and reduced environmental impact.

R-410A is also known for its environmental sustainability. Unlike its predecessor, R-22, R-410A has zero ozone depletion potential (ODP) due to its composition of hydrofluorocarbons (HFCs). Although it does have a global warming potential (GWP), the advancements in technology have made R-410A a more environmentally friendly option compared to many older refrigerants.

Developed through innovative technological advancements, R-410A systems often incorporate variable speed compressors and efficient heat exchangers. These technologies allow for better modulation of cooling and heating outputs, ensuring that the indoor environment remains comfortable while using the least amount of energy possible.

Another significant characteristic of R-410A is its compatibility with a wide range of HVAC equipment. Many new air conditioning systems are designed specifically to use R-410A, which has led to the creation of a robust market for these units. Additionally, R-410A systems tend to require less maintenance and have longer lifespans compared to those using older refrigerants.

Safety is another consideration for R-410A users. While R-410A is non-toxic and non-flammable, technicians who work with this refrigerant need to be trained and certified due to its high-pressure properties. Proper handling and installation are crucial to ensure system efficiency and reliability.

In summary, the Heat Controller R-410A stands out in the HVAC industry for its efficiency, environmental benefits, advanced technologies, and compatibility with modern systems. As the industry continues to evolve, R-410A remains a key player, paving the way towards more sustainable and efficient heating and cooling solutions.
Top Page Image Contents