TROUBLESHOOTING

29

 

PROBLEM

CHECK

CURE

 

 

 

 

 

Burners burn with a yellow or orange flame, in

Inspect Spider/Insect Screens for possible obstructions.

Clean Spider/Insect Screens. (See Section “Annual

 

conjunction with the smell of gas (This is normal

(Blockage of holes.)

Maintenance”)

 

for the burner lighting tube).

 

 

 

 

 

 

 

Symptoms:

Is fuel hose bent or kinked?

Straighten fuel hose.

 

Burner does not light, or flame is low in “HI”

 

 

 

position.

 

 

 

 

 

 

 

 

Does Burner light with a match?

If you can light Burner with a match, then check the

 

 

 

Crossover® ignition system.

 

 

Did you use the snap igniter several times until the main

Make sure to hold the control knob in for two seconds after

 

 

burner lit (See Lighting Instructions)?

snapping the igniter and seeing the orange flame from the

 

 

 

burner lighting tube.

 

 

 

 

 

 

Does the igniter work (Do you see a spark when you

Try manually lighting the burner (refer to “Main Burner

 

 

repeatedly use the snap igniter?

Manual Lighting”). Call customer service.

 

 

 

 

 

Experiencing flare-ups:

Are you preheating barbecue in the prescribed manner?

All burners on HI for 10 to 15 minutes for preheating.

 

 

 

 

 

 

Are the cooking grates and Flavorizer® bars heavily

Clean thoroughly. (See Section “Cleaning”)

 

 

coated with burned-on grease?

 

 

 

 

 

 

CAUTION: Do not line the bottom tray

Is the bottom tray “dirty” and not allowing grease to flow

Clean bottom tray.

 

into catch pan?

 

 

with aluminum foil.

 

 

 

 

 

 

 

 

 

Burner flame pattern is erratic. Flame is low when

Are burners clean?

Clean burners. (See Section “Maintenance”.)

 

burner is on “HI”. Flames do not run the whole

 

 

 

length of the burner tube.

 

 

 

 

 

 

 

Inside of lid appears to be “peeling.” (Resembles

The lid is porcelain enamel or stainless steel, not paint. It

Clean thoroughly. (See Section “Cleaning”.)

 

paint peeling.)

cannot “peel”. What you are seeing is baked on grease

 

 

 

that has turned to carbon and is flaking off.

 

 

 

THIS IS NOT A DEFECT.

 

 

 

 

 

 

Cabinet doors are not aligned.

Check the adjustment pin on the bottom of each door.

Loosen adjustment nut/s. Slide door/s until aligned. Tighten

 

 

 

nut.

 

 

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

SIDE BURNER MAINTENANCE

PROBLEM

CHECK

CURE

 

 

 

Side Burner does not light.

Is gas supply off?

Turn supply on.

 

 

 

Flame is low in “HI” position

Is the fuel hose bent or kinked?

Straighten hose.

 

 

 

Push button ignition does not work.

Does burner light with a match?

If match lights burner, check igniter (see below).

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

WWW.WEBER.COM®

Page 29
Image 29
Weber E/S 470 manual Troubleshooting, Side Burner Maintenance, Problem Check Cure

E/S 470 specifications

The Weber E/S 470 is a cutting-edge electric bicycle designed to offer an exceptional riding experience while promoting sustainability. It stands out in the electric bike market with its combination of advanced features, robust technology, and comfort-focused characteristics. The E/S 470 caters to a diverse range of cyclists, from daily commuters to recreational riders.

One of the standout features of the Weber E/S 470 is its powerful electric motor. The bike is equipped with a high-performance mid-drive motor that delivers impressive torque and speed. This ensures that riders can tackle even the steepest hills with ease, while also providing a natural feel that closely mimics traditional cycling. The motor is seamlessly integrated with the bike's gears, allowing for smooth shifting and enhanced control over various terrains.

Battery life is a crucial factor for any electric bike, and the Weber E/S 470 excels in this area. It comes with a high-capacity lithium-ion battery that offers an impressive range on a single charge. Depending on the mode selected, riders can expect anywhere from 40 to 80 miles of assistance, making it perfect for both short commutes and longer adventures. The battery is conveniently detachable, allowing for easy charging at home or in the office.

In terms of design, the E/S 470 is characterized by its sleek and modern aesthetics. It features a lightweight aluminum frame, making it easy to handle while ensuring durability. The bike's geometry is carefully crafted to provide an upright riding position, which enhances comfort, especially during long rides. The inclusion of front and rear suspension allows for a smooth ride over uneven surfaces, absorbing shocks and providing stability.

Technological innovations further enhance the user experience of the Weber E/S 470. The bike is equipped with an intuitive digital display that provides key information such as speed, distance traveled, battery level, and assistance mode. Riders can easily switch between different levels of pedal assist, tailoring the bike's performance to their personal preferences and riding conditions.

Safety is paramount, and the Weber E/S 470 includes high-quality hydraulic disc brakes that ensure reliable stopping power in all weather conditions. The bike also features integrated lighting systems for enhanced visibility during night rides and a set of durable tires designed for traction and stability.

Overall, the Weber E/S 470 is an exemplary model in the world of electric cycling. With its powerful motor, long-range battery, comfortable design, and user-friendly technology, it appeals to a broad audience looking for an eco-friendly and efficient mode of transportation. The E/S 470 embodies the perfect blend of performance and practicality, making it an ideal choice for anyone looking to embrace electric mobility.