GAS INSTRUCTIONS

15

 

 

2)Remove the two screws that secure the control panel to the frame.

3)Remove the control panel. Tilt panel forward and lift up and away from grill. Be careful not to break or disconnect the wires for the control panel lights.

Rest the control panel against the left side of the grill (A) exposing the valves, burners, igniter, and manifold.

(A)

2

1

3

CHECK THE FLEXIBLE HOSE TO MANIFOLD CONNECTION

The natural gas hose has been attached during the manuafacturing process. We do recommend that the hose to gas manifold connnection be leak tested, following guidelines in this Owner’s Guide, prior to barbecue operation.

CHECK FOR GAS LEAKS

DANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. Sparks or open flames will result in a fire or explosion which can cause serious bodily injury or death and damage to property.

WARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

Note: All factory-made connections have been thoroughly checked for gas leaks. The burners have been flame-tested. As a safety precaution however, you should recheck all fittings for leaks before using your Weber® gas barbecue. Shipping and handling may loosen or damage a gas fitting.

WARNING: Perform these leak checks even if your barbecue was dealer or store assembled.

You will need: a soap and water solution, and a rag or brush to apply it.

Make sure side burner is off (See LEAK CHECK PREPARATION). Remove valve control knob and screws. Remove porcelain top.

To perform leak checks: Slide back the collar of the quick disconnect (1). Push male fitting of the hose into the quick disconnect, and maintain pressure. Slide the collar

closed (2). If it does not engage or lock, repeat procedure. Gas will not flow unless the quick disconnect is properly engaged.

Turn on gas supply.

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form or if a bubble grows, there is a leak.

Note: Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

WARNING: Do not ignite burners when leak checking.

WWW.WEBER.COM®

Page 15
Image 15
Weber E/S 470 manual Check the Flexible Hose to Manifold Connection, Check for GAS Leaks

E/S 470 specifications

The Weber E/S 470 is a cutting-edge electric bicycle designed to offer an exceptional riding experience while promoting sustainability. It stands out in the electric bike market with its combination of advanced features, robust technology, and comfort-focused characteristics. The E/S 470 caters to a diverse range of cyclists, from daily commuters to recreational riders.

One of the standout features of the Weber E/S 470 is its powerful electric motor. The bike is equipped with a high-performance mid-drive motor that delivers impressive torque and speed. This ensures that riders can tackle even the steepest hills with ease, while also providing a natural feel that closely mimics traditional cycling. The motor is seamlessly integrated with the bike's gears, allowing for smooth shifting and enhanced control over various terrains.

Battery life is a crucial factor for any electric bike, and the Weber E/S 470 excels in this area. It comes with a high-capacity lithium-ion battery that offers an impressive range on a single charge. Depending on the mode selected, riders can expect anywhere from 40 to 80 miles of assistance, making it perfect for both short commutes and longer adventures. The battery is conveniently detachable, allowing for easy charging at home or in the office.

In terms of design, the E/S 470 is characterized by its sleek and modern aesthetics. It features a lightweight aluminum frame, making it easy to handle while ensuring durability. The bike's geometry is carefully crafted to provide an upright riding position, which enhances comfort, especially during long rides. The inclusion of front and rear suspension allows for a smooth ride over uneven surfaces, absorbing shocks and providing stability.

Technological innovations further enhance the user experience of the Weber E/S 470. The bike is equipped with an intuitive digital display that provides key information such as speed, distance traveled, battery level, and assistance mode. Riders can easily switch between different levels of pedal assist, tailoring the bike's performance to their personal preferences and riding conditions.

Safety is paramount, and the Weber E/S 470 includes high-quality hydraulic disc brakes that ensure reliable stopping power in all weather conditions. The bike also features integrated lighting systems for enhanced visibility during night rides and a set of durable tires designed for traction and stability.

Overall, the Weber E/S 470 is an exemplary model in the world of electric cycling. With its powerful motor, long-range battery, comfortable design, and user-friendly technology, it appeals to a broad audience looking for an eco-friendly and efficient mode of transportation. The E/S 470 embodies the perfect blend of performance and practicality, making it an ideal choice for anyone looking to embrace electric mobility.