14

GAS INSTRUCTIONS

 

 

TYPE OF GAS

Your natural gas grill is factory built to operate using natural gas only. Never attempt to operate your grill on gases other than the type specified on the grill rating plates.

Your grill operates at 4.5” of water column pressure. If replacement of the hose becomes necessary, factory specified parts are required. See your local dealer.

For safety and design reasons, the conversion of a Weber® grill from operation using Natural gas to operation using LP gas requires the change out of the entire gas supply system of the grill. If this becomes necessary, see your dealer for additional information.

WHAT IS NATURAL GAS?

Natural gas, often called methane, is a safe modern fuel. Natural gas is supplied by your local utility and should be readily available if your house is already heated with gas.

PORTABLE INSTALLATION

Weber® recommends moving the grill at least two (2) feet from the gas supply and any combustible surfaces. After the gas supply has been run and checked for leaks in accordance to the assembly instructions, you are ready to grill. To connect the hose to the gas supply, pull back the outer fitting, insert the hose fitting all of the way, and release the outer fitting. This process will produce a gas joint.

LEAK CHECK PREPARATION

CHECK THAT ALL BURNER VALVES ARE OFF

Valves are shipped in the “OFF” position, but you should check to be sure that they are turned off. Check by pushing in and turning clockwise. If they do not turn, they are off. Proceed to the next step. If they do turn continue turning them clockwise until they stop, then they are off. Proceed to the next step.

1

Swivel Connection

2

Install covers when hose is disconnected

 

 

3

Shut Off Valve

4Coat this pipe nipple with gas resistant pipe dope

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Socket

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Male Connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Socket

2

Sleeve

3

Push Sleeve Back

4

Plug

Push plug until sleeve snaps forward locking plug in socket.

(This turns on gas automatically.)

When properly assembled the plug cannot be removed without pushing

the sleeve back.

To disconnect, push sleeve back and pull out plug.

(This automatically shuts off gas.)

CHECK FOR GAS LEAKS

WARNING: The gas connections of your Summit® gas grill have been factory tested. We do however recommend that you leak check all gas connections before operating your Summit® gas grill.

REMOVE CONTROL PANEL

Part required: Phillips Screwdriver.

1) Remove the burner control knobs.

(A)

WWW.WEBER.COM®

Page 14
Image 14
Weber E/S 470 manual Type of GAS, What is Natural GAS?, Portable Installation, Leak Check Preparation

E/S 470 specifications

The Weber E/S 470 is a cutting-edge electric bicycle designed to offer an exceptional riding experience while promoting sustainability. It stands out in the electric bike market with its combination of advanced features, robust technology, and comfort-focused characteristics. The E/S 470 caters to a diverse range of cyclists, from daily commuters to recreational riders.

One of the standout features of the Weber E/S 470 is its powerful electric motor. The bike is equipped with a high-performance mid-drive motor that delivers impressive torque and speed. This ensures that riders can tackle even the steepest hills with ease, while also providing a natural feel that closely mimics traditional cycling. The motor is seamlessly integrated with the bike's gears, allowing for smooth shifting and enhanced control over various terrains.

Battery life is a crucial factor for any electric bike, and the Weber E/S 470 excels in this area. It comes with a high-capacity lithium-ion battery that offers an impressive range on a single charge. Depending on the mode selected, riders can expect anywhere from 40 to 80 miles of assistance, making it perfect for both short commutes and longer adventures. The battery is conveniently detachable, allowing for easy charging at home or in the office.

In terms of design, the E/S 470 is characterized by its sleek and modern aesthetics. It features a lightweight aluminum frame, making it easy to handle while ensuring durability. The bike's geometry is carefully crafted to provide an upright riding position, which enhances comfort, especially during long rides. The inclusion of front and rear suspension allows for a smooth ride over uneven surfaces, absorbing shocks and providing stability.

Technological innovations further enhance the user experience of the Weber E/S 470. The bike is equipped with an intuitive digital display that provides key information such as speed, distance traveled, battery level, and assistance mode. Riders can easily switch between different levels of pedal assist, tailoring the bike's performance to their personal preferences and riding conditions.

Safety is paramount, and the Weber E/S 470 includes high-quality hydraulic disc brakes that ensure reliable stopping power in all weather conditions. The bike also features integrated lighting systems for enhanced visibility during night rides and a set of durable tires designed for traction and stability.

Overall, the Weber E/S 470 is an exemplary model in the world of electric cycling. With its powerful motor, long-range battery, comfortable design, and user-friendly technology, it appeals to a broad audience looking for an eco-friendly and efficient mode of transportation. The E/S 470 embodies the perfect blend of performance and practicality, making it an ideal choice for anyone looking to embrace electric mobility.