Owner’s Manual | Room Air Heat Pump with | Heat Controller, Inc. |
|
|
|
Front Grille and Filter Removal
The front contains a removable grille that provides easy access to the air filter.
Grasp filter handle and slide filter out of unit.
Optional Air Filter Installation
Remove air filter from plastic bag. Insert three tabs
on right side of filter into three slots on filter frame. Carefully bow middle of filter until two tabs on filter can be inserted into two slots on filter frame.
Reinstall air filter and grille by reversing removal procedure.
Front Grille and Cabinet Cleaning
Grille and cabinet may be cleaned with warm water and mild soap or detergent. Cleaning and polishing compounds are not recommended, as they may damage plastic surfaces.
Air Filter Cleaning
A dirty air filter reduces operating efficiency of unit. Filter should be inspected at least once every week during opera- tion. Clean filter with vacuum cleaner or wash in warm water and mild detergent. Filter should be thoroughly dried before replacing in unit. Do not operate unit without filter in place.
Fan Motor Care
The fan motor is permanently lubricated for long life. There is no need to oil the motor.
Slide-out Chassis Removal from Outer Case
1.Remove front grille by sliding grille to left and pulling out.
2.Remove air filter by sliding to left.
3.Remove four screws holding plastic front to unit and remove front.
4.If the unit has a screw holding the basepan clip to the chassis, remove the screw.
CAUTION
To reduce the risk of personal injury, be sure to have sufficient help when moving your unit. A room air conditioner can be excessivley heavy.
5.Using basepan handle, pull chassis straight out, slowly and evenly, until approximately
4
