Heat Controller RAH-183G From The Case, 1WINDOW REQUIREMENTS, 2STORM WINDOW REQUIREMENTS

Owner’s Manual Room Air Heat Pump with R-410A Heat Controller, Inc.

Installation Instructions

1WINDOW REQUIREMENTS

●These instructions are for a standard double-hung window. You will need to modify them for other types of windows.

●T he air conditioner can be ins talled without the accordion panels if needed to fit in a narrow window. See the window opening dim ens ions .

●All supporting parts must be secured

to firm wood, m as onry or m etal.

●T he electrical outlet m us t be within reach of the power cord.

173/8" min.

30" to 38.1" (With accordion panels)

26” min.

(Without accordion panels)

26" min.

(Without accordion panels)

2STORM WINDOW REQUIREMENTS

As torm window fram e will not allow the air conditioner to tilt toward the outs ide, and will keep it from draining properly. To adjus t for this , attach a piece of wood to the s tool.

WOOD PIECES-

WIDT H: 2"

LENGTH: Long enough to fit inside the window frame.

THICKNESS : To determine the thickness, place a piece of wood on the stool to make it 1/2" higher than the top of the storm window frame.

Attach securely with nails or screws provided by the installer.

Wood

1/2" higher
than frame	Stool

Storm window frame

3REMOVE THE AIR CONDITIONER

FROM THE CASE

ARemove the locking screw and locking

Remove the locking screw and lock- bracket from the lower frame. Save to ing bracket from the lower frame. reinstall later.

Save to reinstall later.

BRemove the ground screw and save to

Remove the ground screw. Save to reinstall later.

reinstall later.

Remove the ground screw and save to reinstall later

CSlide the air conditioner from the case by gripping the base pan handle and pulling unit forward while bracing the case.

4PREPARE THE WINDOW

Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.

8