Heat Controller, Inc. | Room Air Heat Pump with | Owner’s Manual | ||
|
|
|
|
|
|
|
|
|
|
Ins tallation Ins tructions
8INSTALLTHEAIRAIRCONDITIONER
IN THECASECASE
ASlide the air conditioner into the case. Do not push on the
controls or the finned coils. Make sure the air conditioner is firmly seated.
BReinstall the locking bracket and screw removed earlier.
CReconnect the ground wire to the air conditioner using the screw removed earlier.
IMPORTANT: The ground wire must be reinstalled to ensure a proper ground.
DRemove the front grille from its box and remove the shipping tape.
EGrasp the inlet grille at the bottom corners and pull it forward. Unhook it from its top hinges and set it aside.
FUsing the tab, pull up slightly on the filter to release it and pull it down and out.
8INSTALL THE AIR CONDITIONER
IN THE CASE (cont.)
GPull the coiled power cord from its shipped position in the air discharge area. Attach the front grille frame to the case by inserting the tabs on the grille frame into the slots on the front top of the case. Push the grille frame in. And install the 2 type F screws at bottom left and right side of front panel.
Guide the lever carefully through the grille fram e as you pus h it in.
HSecure the front grille frame to the case with one type C screw.
IReinstall the filter.
J Reinstall the inlet grille. Connect power.
11
