Heat Controller REG-183A Synchronous Motor, Disassembly, Remove the control box. Refer to section

Disassembly

13.SYNCHRONOUS MOTOR

1.Remove the control box. (Refer to section 3)

2.Unfold the control box. (Refer to section 10)

3.Remove the crankshaft.

4.Disconnect all the leads of the synchronous motor.

5.Remove the 2 screws which fasten the synchronous

motor. (See Fig. 30)

6. Re-install the components by referring to the removal procedure, above.

Figure 30

Service Manual 18