Heat Controller REG-243A manual Airhandlingparts, Cover at the top, Blower, 15Room Air Conditioner

Disassembly

Airhandlingparts

4. Cover (at the top)

1. Remove the front grille. (Refer to section 1)

2. Remove the cabinet. (Refer to section 2)

3. Remove 11 screws which fasten the brace and covers.

4. Remove the covers and the brace. (See Fig. 19)

5. Re-install the components by referring to the removal procedure, above.

Figure 19

5.Blower

1.Remove the cover. (Refer to section 4)

2.Remove the 3 screws which fasten the evaporator at the left side and the top side.(See Fig. 19)

3.Move the evaporator sideward carefully.

4.Remove the 2 terminals carefully(See Fig. 20).

5.Remove the 3 screws which fasten the Heater Cover. (See Fig. 20)

6.Remove the Heater Cover.(See Fig. 20)

7.Remove the orifice from the air guide carefully. (See Fig. 21)

8.Remove the clamp which secures the blower with plier. (See Fig. 21)

9.Remove the blower with plier or your hand without touching blades. (See Fig. 22)

10.Re-install the components by referring to the removal procedure, above.

Figure 20

Figure 21

Figure 22

15Room Air Conditioner