Heath Zenith 2LBL3 operating instructions DualBrite Motion Sensor Light Control, Operation, Test

Operating Instructions & Parts Manual 2LBL3, 2LBL4

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or main- tain the product described. Protect yourself and others by observing all safety information. Failure to comply could result in personal injury and/or property damage! Save these instructions for future reference.

® Requirements

DualBrite® Motion Sensor Light Control

Features

•DualZone™ Technology.

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•DualBrite® Timer.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

This package includes:

Lamp Holders

		Rubber Plug
		Plastic Hanger
Cover Plate	Sensor	2 Wire
Light Control
		Connectors
Mounting Bolt	Mounting Strap

•The light control requires 120-volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 20 Min		x
Manual	To Dawn*		x
Accent	3, 6 Hr, to Dawn		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put ON-TIME switch	ON-TIME	DualBrite®
on the sensor bottom
to TEST and the Dual-
	TEST 1 5 20	Off 3 6 Dusk to
Brite® switch OFF.			Dawn

AUTO

Put the ON-TIME switch in the 1, 5,	ON-TIME
or 20 minute position.
	TEST 1 5 20
MANUAL MODE

Gasket

2 Lamps	6 Screws
(installed)
	(3 sizes included)

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 20 position.

1 Second OFF

then...

... back on.

HEA 009	598-1325-00
Printed in China	LPG-5597
09/07