Troubleshooting

Chime does not sound:

Make sure push button and chime codes are the same (See pages 2 and 3).

Check orientation of push button battery (See page 3).

Check charge of push button and chime batteries, replace if necessary.

Batteries seem OK, but the chime does not work when installed:

Do not mount chime or push button on metal or near metal studs. This reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move chime or push button off metal surface.

Concrete floors may reduce range. Move chime away from floor.

Try locating chime closer to push button.

The range of the wireless chime can vary with location, temperature and bat- tery condition.

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance

before returning product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.hzsupport.com. If the problem persists, call* for assistance at 1-800-858-8501,7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

Regulatory Information

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.

- -

595-5551-10

Page 4
Image 4
Heath Zenith 595-5551-10 manual Troubleshooting, Technical Service, Regulatory Information, Chime does not sound