Heath Zenith 598-1136-04 manual Example 2 - Programming ON/OFF Times

Example 2 – Programming ON/OFF Times

Following is an example of how to program a light source to turn ON and OFF at preset times. In this example the kitchen lights (Group A from previous example) will be programmed to turn ON in the morning at 6:45 am and turn OFF at 9:00 am. The same light will also be programmed to turn ON in the evening at 4:00 pm and turn OFF at 10:00 pm.

	Each control can be programmed a maxi-
	mum of 2 programs. See charts below for
➊ Press Group A button -	possible choices.
				ON/OFF		1	Group A
Note: Indicator light is ON.	A
				Program		1	Group B
	ON		ON
	GROUP
	A	B
	DIM	DIM				OR
	1	2
	OFF		OFF
	ON	MODE	ON	ON/OFF		2	Group A
	DIM	DIM
AM	OFF		OFF
PM	DIM	DIM		Program		0	Group B
	A	ALL
	ON	ON	ON
	OFF	ALL	OFF
	ON	OFF	ON			OR
	DIM	PANIC DIM		ON/OFF		0	Group A
	OFF		OFF
– Select	+ Time Set Program			Program		2	Group B
➌The hour numbers are high-	➋ Press		Program		button -
lighted when Program mode is	Note: Program indicator light						et Program
entered. Press (+) and (-) but-	and Mode 1 light are ON.
tons - Change hours to 6 am.
➍ Press Select button - Note:	➏ Press ON button of kitchen
Minute numbers will highlight.	light control - Note: Indicator				A
➎ Press (+) and (-) buttons	light FLASHES.
- Change minutes to 45.

To set OFF time, complete the follow- ing steps:

APress Select button - Note: Hour numbers will highlight.

BPress (+) and (-) buttons - Change hours to 9 am.

CPress Select button - Note: Minute numbers will highlight.

DPress (+) and (-) buttons - Change minutes to 00.

EPress OFF button of kitchen light control - Note: Indicator light

FLASHES.

To program 2nd ON/OFF time:

➋Press Program button - Note: Mode #2 indicator light should be ON for this example.

Beginning with step 3 above, program the ON time to 4:00 pm and the OFF time to 10:00 pm.

To exit Program, press the Program button until the Program indicator light is OFF.

Note: To cancel a program, set both the ON time and the OFF time to the same time (Example: Set both the ON time and the OFF time to 4:00 pm to cancel the 2nd program above).

Note: Mode should be set to modes 1 and 2 to run both time programs in this example.

598-1136-04