Heath Zenith 598-1136-04 manual Product Identification

Product Identification

Light Control - ON, OFF, DIM* with indicator light.

Control Group Indicator- Light on is Group A, light off is Group B (Note: also flashes upon Program entry).

Clock
AM, PM, 24 Hour
Clock Set - Lights
indicate AM or PM	PM
	AM
setting. No light	A
indicates 24 Hour
setting.
	– Select + Time Set Program

SELECT, (-, +) - Set hours and minutes for clock and ON/OFF program setup.

TIME SET - Set the time and select between 12-hour or 24-hour mode.

PROGRAM - Program ON/OFF times for light controls (light is on when in program mode).

Control Group - Select Group A or B lighting controls.

Light Program Modes - Select Mode 1, 2, 1 & 2, or OFF (lights will indicate which mode(s) are selected.

			Control Identification -
ON		ON	Remove clear plastic film
	GROUP
	A	B	by placing two fingers on
DIM		DIM
OFF		OFF
	1	2	the plastic and “pinching”
DIM	MODE	DIM
ON		ON	the plastic.Remove card.
OFF	ALL	OFF
OFF	ON	OFF	Use the decals (included)
	ALL
ON		ON
DIM		DIM
	OFF		or write on the card to la-
ON		ON
DIM	PANIC	DIM	bel each control.Replace
OFF		OFF
			card and plastic film.
		ALL ON - Turns all lights within a
		Group ON.Select either Group A
		or B then press ALL ON.

ALL OFF - Turns all lights within a Group OFF. Select either Group A or B then press ALL OFF.

PANIC* - All lights within a Group will flash ON and OFF. Select either Group A or B then press PANIC.

*DIM Control: Dims lighting controls that are equipped with the dimming feature. Pressing DIM will toggle through the different dim levels. Each time the DIM button is pressed, the control LED will momentarily light.

The receiver saves the last dim setting used.To recall the last dim setting, press the DIM control once.

Note: Not all lighting controls have the DIM and PANIC (flash) feature.

598-1136-04