![Example 1 – Set Up Receivers](/images/new-backgrounds/36347/363477x1.webp)
Example 1 – Set Up Receivers
Following is one example of how the Lighting Control Panel can be programmed to operate multiple light sources within a home.
The Control Panel has two “Groups” (A and B) with up to eight lighting controls in each group. In this example, the eight controls within Group A will operate the following light sources: Family Room (3), Kitchen, Front Porch, Back Porch, Garage, and Foyer.
Light: Family Room Lamp #1 and #2
Receiver:
1 2 3 4
Light: Family Room Lamp #3
Receiver: Wall Receptacle
Receptacle Code Setting: 1 2 3 4
Group LED
AM
PM
ON
DIM
OFF
ON
DIM
OFF
Light: Family Room Ceiling Light
Receiver: Wall Switch
Wall Switch Code Setting:
|
|
|
| 1 2 3 4 |
|
| Light: Foyer | ||
|
| Receiver: Wall Switch | ||
|
| Wall Switch Code | ||
|
| Setting: | 1 2 3 4 | |
|
| Code Selection | ||
GROUP | Switches |
| ||
A | B |
| ||
|
| Group Selection | ||
| ON | ON | ||
| DIM | |||
| OFF | |||
1 | 2 |
|
| Switch (Group A |
|
|
|
| |
MODE | ON |
|
| Shown) |
| DIM | 1 |
| |
| OFF |
| ||
| 2 |
| ||
|
|
|
A
A
ON
DIM
OFF
ON
DIM
OFF
ALL |
| 3 | 4 |
ON | ON |
| |
DIM |
| ||
| Note: The “X” has been | ||
ALL | OFF | ||
OFF |
| ||
|
| ||
| ON | placed on the switches | |
PANIC DIM |
| ||
| OFF | ||
|
| to help clarify the code |
– | Select | + | Time Set Program |
Light: Kitchen
Receiver: Wall Switch
Wall Switch Code Setting: 1 2 3 4
Light: Front Porch
Receiver: Wall Switch
Wall Switch Code Setting: 1 2 3 4
settings on this page. | |
Light: Garage |
|
Receiver: Lamp Socket | |
Lamp Socket Code |
|
Setting: | 1 2 3 4 |
Light: Rear Porch
Receiver: Floodlight
Floodlight Code Setting: 1 2 3 4
Set code switch 4 on receivers to Group | To set receivers to work with Group B | |
A setting (down) for all receivers to | controls, slide code switch 4 to Group B | |
operate in Group A. | (up) on receivers and set code switches | |
Set code switches 1 through 3 on receiv- | 1 through 3 as shown above. | |
ers to match the corresponding control | Possible Light Sources for Group B: | |
setting in above example. | • | Bedroom #1 (Wall Switch) |
To Operate: | • | Bedroom #2 (Wall Switch) |
1. Press Group A button (Note: Group | • Master Bedroom (Wall Switch) | |
A LED will be ON). | • Master Bedroom Lamp #1 | |
2. Press corresponding control button | • | Master Bedroom Lamp #2 |
for desired action of selected light | • | Master Bath (Wall Switch) |
source. | • | Closet (Lamp Socket Converter) |
| • | Hall Ceiling Light (Wall Switch) |