Heath Zenith 9600LED series warranty Operation, Manual override Mode Adjustment of Coverage Area

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Security	5 or 10 Minutes		x
Automatic	Dusk-to-Dawn		x
Override
Manual	Until Dawn*		x
Override

* resets to Security mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

MANUAL override MODE

Adjustment of Coverage Area

The sensor on this light fixture detects “motion” by the movement of heat across the coverage area.However, following are examples of objects that also produce heat and can cause the sensor to trigger:

• Pools of Water	• Air Conditioners
• Dryer Vents	• Animals
• Heating Vents	• Automobile Traffic

If you suspect that a heat source of this type is trig- gering the sensor, reduce the sensitivity.

SPECIFICATIONS

Range	Up to 30 ft. (9.1 m) [varies
	with surrounding tempera-
	ture].

Manual Override mode can only be activated at night when the ON-TIME switch is set to the 5 or 10 minute position.

Flip the light switch off for one sec- ond then back on to change from SECURITY mode to MANUAL OVERRIDE mode.

To return to SECURITY mode, either:

•turn the light off for one minute then turn it on, or...

•daylight will automatically reset the light to SECURITY mode.

1 Second OFF

then...

... back on.

Sensing Angle	180°
Electrical Load	Up to 180 Watt Maximum
	Tungsten Incandescent
	or 5 Watt Maximum LED
	(Lights of America model
	2025LEDE12).
Bulb Type	E12 Candelabra Base,
	Type “B”, 60 Watt Maximum
	Tungsten Incandescent or
	LED model 2025LEDE12
	1.5 Watt.
Sensor Capacity	360 Watt (3.0 A) Maximum
	Tungsten Incandescent
Power Requirements ....	120 VAC, 60 Hz
Operating Modes	TEST, SECURITY, AUTO-
	MATIC OVERRIDE and

Mode Switching Summary

	TEST	ON-TIME Switch at 5 or 10
		minutes
SECURITY
	AUTO
MODE			Flip light switch off
			for one second then
MANUAL MODE			back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the SECURITY mode.

	MANUAL OVERRIDE
ON-Timer	5 or 10 minutes
Test Timer	5 Seconds
Automatic
Override Timer	Dusk-to-Dawn
Manual
Override Timer	Until Dawn

6 598-1338-03