Wiring
WARNING:Turn power off at circuit breaker or fuse.
Note: All wiring should be run in accordance with the National Electrical Code through conduit or another acceptable means. Contact a qualified electrician if there is any question as to the suitability of the system.
CAUTION: DO NOT connect the RED wire unless you want to control other lights from the motion sensor (see Optional Wiring).
Connect the fixture wires to the wires in the junction box. Twist the wires together and secure with wire connectors.
Recommended Grounding Method
Use a green ground “pigtail” (not provided) and twist one end together with the bare fixture wire and the box ground wire. Secure with a wire con- nector. Secure the other end of the “pigtail” with the GND screw on the
Black
Light
Green or Bare
White
Fixture
One Motion Light
White
Light | Light |
Fixture | Fixture |
Black
Green or
Bare
Two Motion Lights
Black to black
White to white
If you have metal junction box, you may not need the green “pigtail”. If you are unsure about the grounding method, consult your local building code.
2 |
