Heath Zenith 9600LED series warranty Features, Requirements, Unpacking, Installation

Dated receipt required for warranty replacement.

Features

•Automatically comes on when motion is detected.

•Automatically turns light off.

•Photocell keeps the light off during daylight hours.

Requirements

•The light control requires 120 volts AC.

•If you want to use Manual Override mode, the control must be wired through a switch. NOTICE: Not to be used on light dimmer or timer- controlled circuits.

•Some electrical codes require installation by a qualified electrician.

•This light fixture has been tested/certified us- ing Lights of America LED Lamp Model No. 2025LEDE12.

Unpacking

Be sure to remove all contents from packaging and verify all items are present before assembling this light fixture. This package includes the following items:

•Lantern

•Three LED Lamps

(Lights of America Model: 2025LEDE12)

•Universal mounting bracket (X-Bar)

•Mounting hardware

•Wire nuts

•Owner’s Manual

Motion Sensing Diecast Metal Lantern

Model: 9600LED Series

INSTALLATION

For best performance, mount the fixture about 6 feet (1.8 m) above the ground.

1.Remove two decorative nuts.

2.Remove X-Bar.

3.Tighten mounting screws on X-Bar finger tight.

4.Attach X-Bar to junction box.

Lantern Base X-Bar

Decorative Nut

Lantern Mounting

Screw

Junction Box

X-Bar

Bracket Mounting

Screw

Note: We recommend having an assistant help hold the lantern assembly during the wiring process.

© 2008 598-1338-03