Mode Switching Summary
| TEST |
|
|
|
|
| |
|
|
| |||||
|
|
|
|
|
| ||
|
|
|
|
|
|
| 5, or 10 minutes |
| AUTO |
|
|
|
|
| Flip light switch |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| off for one second |
MANUAL MODE |
|
|
| ||||
|
|
| then back on* | ||||
|
|
| |||||
*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.
DualBrite® Dimmer Control
Light comes on half bright for selected time after dusk (Off, 3 hr., 6 hr., until dawn). Selecting OFF disables this feature. The motion sensing features will continue to work as described in this manual. If motion is sensed, the light turns on full bright for the
INSTALLATION
Estimated Installation Time: 30 minutes Items needed for installation (not included):
• | Phillips and flathead screwdrivers | |
• | Pliers | • Wire strippers/cutters |
• | Safety glasses | • Light bulb |
• | Silicone caulk |
|
For best performance, mount the fixture about 6 feet (1.8 m) above the ground.
WARNING: Turn power off at circuit breaker or fuse.
1. Remove |
|
| 2. Remove | ||
two nuts. |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Tighten screws
finger tight.
SENSITIVITY
MIN
MAX
4.Set sensitivity on fixture back to the
5. Attach
junction box
Junction
Box
Due to the size and weight of the fixture, you may find it helpful to have an assistant hold the fixture in place while connecting the wires.
2 |
