Disassemble Light Fixture
1.Remove two decorative nuts from light fixture cover.
2.Remove cover from base.
Light Fixture Base
Light Fixture Cover
Decorative Nut
3.Remove two decorative nuts from fixture screws in universal mounting bracket.
4.Remove universal mounting bracket from base.
Universal |
Mounting |
Bracket |
Decorative Nut
| ITIV | ITY | ||
SENS |
|
| ||
|
|
|
| |
| - M | - HI |
| |
LO |
|
|
| |
|
|
| 10 | MIN |
| 1 | 5 |
| |
| IME |
| ||
|
|
| ||
Install universal Mounting
Bracket
For best performance, mount the fixture at least 8 feet (2.4 m) above the ground.
WARNING: Turn power off at circuit breaker or fuse.
1.Tighten the two fixture screws finger tight.
2.Attach universal mounting bracket to junction box securely with the two screws provided.
Junction Box
Universal Mounting
Bracket
Junction Box Screw
Fixture Screw (Tightened
Finger Tight)
Wiring Light Fixture
1.Connect the junction box wires and the fixture wires together as shown in the following dia- grams.
CAUTION: DO NOT remove wire connec- tor from RED wire or connect the RED wire unless you want to control other lights from this motion sensor fixture.
2. Twist and secure wires with wire nuts.
Note: If you have a metal junction box use the recom- mended grounding method shown in the following illustration.If you are uncertain about the grounding method, consult your local building code.
