Features

• Light comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.

requirements

• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control must
be wired through a switch.
• some electrical codes require installation by
a qualified electrician.
motion sensingPorch Light
This package includes:
• Porch Light
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Nuts
• Lens Shield
SL-4305
© 2007 HeathCo LLC 598-1184-04

OPeratiOn

Note: When first turned on wait about 1 1/2 minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
ON-TIME
Set the ON-TIME switch
on the sensor to TEST.

test 1 5 10 MIN

test

Set ON-TIME switch to
1, 5, or 10 minutes.

autO

ON-TIME Switch at 1, 5, or
10 minutes
... back on.
1 Second OFF
then...
Manual mode only works at night
because daylight returns the sen-
sor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1, 5,
or 10 position.

mOde switching summary

Flip light switch off
for one second then
back on*
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
MANUAL MODE
AUTO
TEST

manuaL mOde

ON-TIME

TEST 1 5 10 min

Before installation, record the model number
listed inside the fixture. attach receipt in case
of possible warranty issues.
model number:
Mode: On-Time Works: Day Night
test 5 Seconds x x
auto 1, 5, or 10 Min x
manual To Dawn* x