White to White Black to

Black to Red

Black

and Black

Testing

1.Turn on the circuit breaker and light switch.

Ground to

Ground

Red to Black

Note: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on wait 1 1/2 minutes.

Motion Sensing

Controlled Motion

Light

Sensing Light

2.Set the SENSITIVITY switch to the “M” position and the ON-TIME switch to the TEST posi- tion.

Wiring Motion Sensing Light to Control Another

Motion Sensing Light

It is also possible to wire two motion sensing lights so that either unit will turn on both lights at the same time(dualcontrolledsystem).Itisrecommendedthat only people with electrical wiring experience attempt this configuration. Please call our customer service number (1-800-858-8501) before attempting this

wiring. If the dual controlled wiring is not done

SENS

ITIVITY

 

 

 

 

 

M -

HI

 

LO -

 

 

 

 

 

10 MI

N

1

5

 

 

 

TESTON-TIME

 

Sensor

Lens

SENSITIVITY

LO - M - HI

TEST 1 5 10 MIN

ON-TIME

correctly, it can destroy both motion sensing fixtures and void your warranty.

Install Fixture Base to

Junction Box

1.Push wires into the junction box.

2.Slide light fixture base onto fixture screws and tighten decorative nuts snugly against the base.

3.Install four candelabra base light bulbs (25 Watts maximum each).

4.Refer to TESTING section before installing cover.

5.After switches are set and testing is complete, use the 2 decorative nuts to install the cover.

 

Junction Box

 

Fixture Screw

 

25 Watt Candelabra

Decorative Nut

Base Bulb

SENS

ITIVITY

 

 

 

 

LO -

M - HI

 

 

 

10 MI

N

1

5

 

TESTON-TIME

 

3.Walk through the coverage area noting where you are when the lights turn on. In TEST mode, light will stay on for only 5 seconds then turn off.

4.AdjusttheSENSITIVITYtoincreaseordecrease the range as needed. Too much sensitivity may cause false triggering due to heat sources in the coverage area (see Adjustment of Coverage Area or Troubleshooting section).

5.Set the amount of TIME you want the light to stay on after motion is detected (1, 5, or 10 minutes).

360°

8 ft. (2.4 m)

30 Feet (9.1 m) in all Directions

Maximum Range

Coverage Angle*

 

(Top View)

* Without lens shield installed.

598-1184-04

Page 4
Image 4
Heath Zenith SL-4305 Testing, Install Fixture Base to Junction Box, Wiring. If the dual controlled wiring is not done

SL-4305 specifications

The Heath Zenith SL-4305 is a highly regarded outdoor motion sensor light designed to enhance security while providing convenience for home and business owners alike. Known for its robust features, this product is ideally suited for various environments, from residential backyards to commercial properties.

One of the standout features of the SL-4305 is its dual-head design, which offers a broad range of illumination, allowing users to cover larger areas effectively. Each head is adjustable, ensuring that light can be directed where it is needed most. The brightness of the LEDs is impressive, providing ample illumination to deter potential intruders and illuminate paths or driveways.

Equipped with advanced motion sensing technology, the SL-4305 features a PIR (Passive Infrared) sensor that detects movement within a specified range. This range can often be adjustable, allowing users to customize the sensor's sensitivity and detection distance. The light can activate automatically when motion is detected, ensuring instant illumination, thereby enhancing safety and security.

Another key characteristic of the SL-4305 is its ease of installation. Designed with user-friendly principles in mind, this motion sensor light can be mounted on walls with minimal effort. With its hardwired design, it requires a connection to a power source, ensuring reliable operation.

The SL-4305 also incorporates various settings that can be adjusted to suit individual needs. Users can typically set the duration for which the light remains on after activation, along with the option to adjust the ambient light sensitivity. This ensures that the light only activates when needed, saving energy and reducing unnecessary light pollution.

Durability is another notable aspect of the Heath Zenith SL-4305. Constructed from weather-resistant materials, this motion sensor light is built to withstand varying outdoor conditions, from rain to snow, ensuring long-lasting performance.

In summary, the Heath Zenith SL-4305 offers an efficient and reliable solution for outdoor illumination. With its dual-head design, advanced motion detection technology, adjustable settings, and weather-resistant build, it provides an optimal combination of security, convenience, and durability for any property. Whether for enhancing safety or simply illuminating dark spaces, the SL-4305 stands out as a premier choice in the market.